Modular System – Extension Board Based
Centralised connection
Configurable to Distributed Architecture
Support Door, Lift, Alarm Monitoring
32 bit ARM Processor
Onboard IP with Encryption
Remote Firmware Download
No | Item | Features |
1. | Max Door | 5 |
2. | Relay Output |
8 (5 for Door Relay + 3 General Purpose) Relay Rating: 1A |
3. | Sensor Input | 16 Supervised (As Door Status or General Purpose) |
4. | IP | Yes. LAN 100 Base T |
5. | Reader |
• MicroEngine Plato Readers : Max 10 (5 Entry + 5 Exit) • Wiegand / ABA Readers : Max 5 |
6. | Comm Port |
Yes. • RS485 to Remote Interface Module • RS485 to Extension Boards |
7. | Card Number Length | Up to 16 Digits |
8. | Max Card DB | 25,000 / 50,000 / 100,000* |
9. | Max Transaction DB | 100,000 / 100,000 / 200,000* |
10. | Time Zone | 255 |
11. | Time Set | 255 |
12. | Floor Zone | 255 |
13. | Global Antipassback | Yes |
14. | Interlocking | Yes |
15. | Access Mode |
1. Card + Pin 2. Card Only 3. Pin Only 4. Facility Code 5. Fingerprint Only 6. Card + Fingerprint 7. Pin + Fingerprint 8. Automatic Lock Release 9. Inhibit Access |
16. | IP Messaging Encryption | Yes. AES128. |
17. | Alarm Monitoring Support | Yes |
18. | Extension |
Up to 3 Extension Board : SNet-E5D : 5 Door Extension Board SNet-E32R : 32 Relay Output Board SNet-E248S : 24 Supervised Input & 8 Relay Output Board Max Extension Capacity : 5 Doors / 128 Inputs / 128 Outputs |
19. | Support Remote Interface Module |
Yes. Use RS485. Door Interface Unit (Max 10) : MK801 Reader Interface I/O Controller (Max 10) : MiO-S168 – 16 Supervised Inputs / 8 Outputs MiO–R16 – 16 Relay Outputs MiO-L32 – 32 LED Driver for Mimic Panel Use Max Remote Capacity : 10 Doors / 160 Inputs / 160 Outputs |
20. | Processor | ARM RISC Processor at 72MHz |
21. | Power Requirement | 12V @ 500mA (Base Board Only) |
22. | Onboard LED / Buzzer | Yes |
23. | Remote Firmware Update | Yes. Can be done through application software at site. |
24. | Controller Package PSU | 12VDC @ 5A with 12AH Battery |