Guide-Linear ball, Gothic arc-groove formed by dual arc-grooves individually on upper and lower rails of body. Ball moving in single groove is structured by 2 points-contact, and total 4contact points in dual arc-groove to form strong rail constructure.
Transmission Parts-Ball screw, It transmits through the ball involving in the locknut and screw to reach the accuracy and longer operation lifetime.
Material-Stainless Steel, Carbon Steel
|
Model No. |
CXS8020-S2PN-CD CXS8020-F2PN-CD |
CXS8030-S2PN-CD CXS8030-F2PN-CD |
CXS8050-S2PN-CD CXS8050-F2PN-CD |
||
|
Mechanical Spec. |
Table Size (mm) |
80 X 80 |
|||
|
Travel Stroke (mm) |
20 |
30 |
50 |
||
|
Drive Type |
Ball screw Ø8, lead 1mm |
||||
|
Rail |
Linear Ball Guiding |
||||
|
Stage Material / Surface Treatment |
SStainless Steel / Nickel Plating |
||||
|
Main Unit Weight (Kg) |
1.15 |
1.2 |
1.35 |
||
|
Coupling |
FAMCS11.6-5*5 |
||||
|
Accuracy Level |
PPrecision grade |
||||
|
Wiring Method |
NGMT Standard |
||||
|
Precision Spec. |
Resolution (Pulse) (µm) |
2 (Full) / 1 (Half) |
|||
|
Max. Speed (Full Step) (mm / sec) |
20 |
||||
|
Positioning Presion (µm) |
5 |
||||
|
Repeatability Precision (µm) |
± 0.5 |
||||
|
Load Capacity (Kgf) |
8 |
||||
|
Missed Step (µm) |
1 |
||||
|
Parallelism (µm) |
20 |
||||
|
Dynamic Straightness (µm) |
2 |
||||
|
Dynamic Parallelism (µm) |
10 | ||||
|
Electrical Spec. |
Motor |
Type / Shaft Numbers |
5-phase stepper / & 28 double shafts |
||
|
Brand / Model |
SANYO / SH5281-7211 |
||||
|
Driver Brand / Model |
Please refer to reference table |
||||
|
Connector |
Stage Side Connector |
15-Pin male end connetor D-SUB / 12-Pin male end connetor HRS |
|||
|
Controller Side Connector |
15-Pin female end connetor D-SUB / 12-Pin female end connetor HRS (Additional options) |
||||
|
Sensor |
Origin Sensor |
Photoelectric sensor GMT-sensor |
|||
|
Limit Sensor |
|||||
|
Origin Approximation Sensor |
N / A |
||||
|
Power Voltage |
24V ± 10% |
||||
|
Control Output |
NPN open collector output under 24V 8mA |
||||
|
Output Control |
Testing (sensing)output transistor OFF (closed) |
||||
| System Configuration Diagram |
|
♦ For selection of the drivers preferred, please refer to the reference table or the catalogue of Motor0Driver. ♦ All of the drivers chosed are the specification of GMT preferred. For different needs, please choose the suitable drivers according to real functional needs.
|
| Axis Definition |
|
GMT has defined different axis as the following figuration according to the movement direction: Horizontal movement direction is X and Y axis. Vertical movement direction is Z axis. Movement around X, Y, Z axis is defined to α axis, β axis, and θ axis. Green arrows present the specified axis movement direction.
|
Motor0driver Reference Table |
|
|
|
|
 |
Malaysia
