Is a plaster-based compound used for flushing joints of plaster board. However, it can also be used as putty to touch-up the fibrous plaster board that produces a smooth fine finished using steel trowel.
Packaging: 18kg/bag
Setting Time: 25 minutes (adjustable with customer required)
Mixing
- Fill container with clean water..
- Sprinkle the stopping Compound into the water. (Approx. 2 parts of compound to 1 part of water).
- Allow to soak for 1 to 3 minutes before mixing..
- Mix to a smooth creamy workable consistency..
- The mixtures is now ready for use..
- Do not over mix otherwise it will accelerate setting of the mixture..
Direction to Use
- Apply the mixture, filling up the joints using a steel trowel..
- Remove excess compound, then apply evenly a thin coat over the joints..
- Apply to fill up uneven surfaces and using steel trowel to produce a smooth finished to the plaster board..
- All tools to be washed with clean water and wipe dry before storing..
Storage
- Store Stopping Compound at room temperature in a cool dry location..
- Allow free flow of air, stack on pallet..
- Keep away from direct exposure to sunlight..
Disclaimer
All product images shown are for illustration purposes only. Actual products may varies in term of size, type, brand, version, colour, and other relevant characteristics.
