详情
Single-phase power analyzer
Product Description
CVM-1D is a power analyzer for single-phase circuits up to 32 A. It has an LCD display with a rotating screen system, showing a total of 24 instantaneous, maximum and minimum electrical variables. It has been designed in an enclosure with only 1 DIN module (18 mm), and the size of the analyzer allows it to be installed in any electrical panel. The unit has the Modbus/RTU (RS-485) protocol and is compatible with the energy management software PowerStudio.
Features
-
Six-digit LCD Display
-
RS-485 Modbus/RTU interface
-
Programmable impulse output and alarm
-
Metering in four quadrants
Application
-
Student residences / Hotels
-
Ports
-
Shopping centres
-
Buildings with rented office space
-
Camp sites
-
Domestic and industrial lines
-
Single-phase lines in general
CVM-1D-Connection
CVM-1D-Dimension
Specification
|
Power circuit |
|
Single-phase power supply |
230 V AC ±20% |
|
Power supply frequency |
50 - 60 Hz |
|
Power supply use |
1.5 VA |
|
Measurement circuit |
|
Phase – Neutral nominal voltage |
184 V AC to 276 V AC |
|
Frequency |
50 / 60 Hz |
|
Nominal current |
32 A |
|
Minimum current |
250 mA |
|
Maximum current |
32 A |
|
Output transistor features |
|
Type |
Optoinsulated transistor (commutator open) NPN |
|
Maximum voltage of operation |
35 V DC |
|
Maximum current of operation |
50 mA |
|
Maximum frequency |
5 impulses / s |
|
Impulse duration |
100 ms (configurable) |
|
Insulation |
3.7 kV RMS / 1 min |
|
Communications |
|
Port |
RS-485 |
|
Protocol |
Modbus / RTU |
|
Build features |
|
Measuring module |
Assembly on DIN rail 46277 (EN 50022) |
|
Number of modules |
1 |
|
Environmental conditions |
|
Operating temperature |
-10 – +50 ºC |
|
Protection degree |
IP 31 |
|
Humidity (without condensation) |
5% - 95% |
|
Maximum altitude |
2000 m |
Safety
Type of insulation EN 61010 double-insulated electric shock protection class II
Standards
IEC 664, VDE 0110, UL94-V0, EC 801, IEC 348, IEC 571-1, Class B EN 50470-3 in Active Energy, Class 2 EN 62053-23 in Reactive Energy, EN 50470-1, EN 61010, EN 61000-4-3, EN 61000-4-4, EN 61000-6-4, EN 55022
Power Analyzer / Energy Values / Circutor / Electric Parameters / Low Voltage / ARON Connection / Backlit LCD SCREEN / Single-Phase. CVM-C10 from Saturn Pyro is the best available in Malaysia. High performance and cost effective Power Energy Meter with 4-quadrant measurement (consumption and generation). Suitable for Medium or Low voltage installations, in both 3 or 4-wire three-phase circuits, two-phase circuits with or without neutral, single-phase circuits or ARON connections. Available in Penang, KL, Selangor, Johor, Sabah, Sarawak & anywhere in Malaysia & Singapore.
Saturn Pyro provides reliable engineering services such Electrical Safety Survey, Power System Studies (Short Circuit, Load Flow & Protection Discrimination on ETAP), Arc Flash Assessment & Labeling, Design Of Earthing & Lightning Protection, Measurement Of Touch & Step potentials, Power Quality Management, Energy Audit and Data Center Performance Assessment. We also provides Electrical Safety Survey such as Inspection of an electrical installation, Identification of risk (electrical hazards), Review of documentation, operations & maintenance procedures, contingency planning, Generation of report in details of risk potentials and plan for mitigation, Closing report post implementationas. Available in Pulau Pinang, Johor, Kuala Lumpur (KL), Selangor and anywhere in Malaysia / Singapore / Bangalore / India / Mumbai.
更多 Saturn Pyro Sdn Bhd 相关资料
Malaysia
