| Description |
Fully integrated and handy Leeb hardness tester with a compact and robust housing. Ideally suited for quick on-site hardness tests. Optional DL probe for confined spaces and recessed surfaces. Equotip Piccolo 2 allows the transfer of the data to a PC. |
| Benefits |
|
| Native Scale | HL |
| Available Scales | HB, HV, HRB, HRC, HS, MPA (Equotip Piccolo 2 only) |
| Available Probes | Leeb D / DL |
| Combination with Other Methods | |
| Average Roughness Ra | 2 / 80 |
| Minimum Mass (kg / lbs) | 0.05 / 0.2 |
| Minimum Thickness (mm / inch) | 3 / 0.12 |
| Standard to Large Objects | Yes |
| Round Objects | In Combination with Support Rings |
| Light Objects (<2kg) | No |
| Very Hard Objects | No |
| Cast Objects | Yes |
| Polished Objects | No |
| Limited Accessibility | With impact device Leeb DC and DL |
| Thin Objects (<5mm) | No |
| Heat Treated Surfaces | Yes |
| Instrument Firmware |
|
| PC Software | Piccolink soft (Equotip Piccolo 2 only) |
| Display | Monochrome 4-digit |
| Memory |
32 KB (~2'000 readings) (Equotip Piccolo 2 only) |
| Connections | USB interface to PC |
| Measuring Range | 150 - 950 HL |
| Measuring Accuracy | ± 4 HL (0.5% at 800 HL) |
| Standards |
|
| Guidelines |
|
| Measurement Accessories |
|
| Verification Tools | Equotip Test Block D / DC, +775 HLD / ~56 HRC, Proceq Factory Calibration (357 13 100) |
Malaysia
