The Micromag HP50 has all the same benefits of the standard Micromag but has been developed to suit high pressure through-spindle-coolant applications, where the smallest of particles can damage seals, spindles and even reduce the efficiency of the cutting tool.
For further information relating to the benefits and operation of the Micromag HP50 please refer to the supplied standard Micromag brochure.
Cleaning
Using the supplied cleaning tool, a fully contaminated core can be cleaned in under 30 seconds. Only metallic particles are removed from the filter and these can be easily disposed. There are no dirty cartridges!
Application
Grinding, edm machine, laser cutting, super finishing, wash station
Material
Mild steel, cast iron sub micron chips and particle
Installation Location
Pre- or post-pump, delivery line, spindle feed or premembrane cartridge.
Part No | Dia A | Height B | Dia C | Port Size | Capacity (kgs) |
Max Flow Rate (ltrs/min) |
---|---|---|---|---|---|---|
MM5/HP/50 | 138 | 247 | 116 | 1 BSP | 1 | 70 |
MM10/HP/50 | 138 | 365 | 116 | 1 BSP | 2 | 100 |
MM20/HP/50 | 138 | 625 | 116 | 1½ BSP | 4 | 150 |
Maximum Pressure | 50 bar |
---|---|
Magnetic Performance | High intensity |
Magnet grade | N45 – Inspected & confirmed via hystergraph prior to use |
Temperature | 5°C to 140°C |
Housing | Aluminium |
---|---|
Lid | Aluminium |
Tube | 304 Grade Stainless Steel |
Surface finish | Machined and anodised |
Sealing | Viton O-ring |