DMG Screw Kompressoren

详情

Stabdards for configuration

Permanent magnet frequency conversion, energy saving selection
The perfect combination of inverter and inverter motor
DMG full series air compressor can be equipped with frequency converter to achieve optimal energy saving effect

• Adjust energy consumption by 20% rhrough frequency converter
• Achieve constant pressure air, provide stable air source for users
• The balance starts, reduces the impact of the motor on the power grid, and extend the mechanical life of the motor and the unit
• The frequency converter can be provided at random and can be upgraded later

 

Permanent magnet synchronous motor scheme

DMG full series air compressor can be equipped with permanent magnet synchronous motor further improve 
the energy saving effect

• Adoptrefractory rare erth permanent magnet and never demagnetize
• Motor efficiency is 5% - 8% higher than ordinary motor, and more energy saving
• Can realize frequency conversion configuration function, and the frequency adjustment range is wide

 

High efficiency and energy saving dual - stage screw host

The double-stage screw compressor has the reasonable pressure ratio, ultra-small leakage and ultra-low noise.Make the
Compressed rotor and rotor of the secondary compression combinationwithin a chassis,and through the direct drive for the front,
make every level of the rotor at runtime and matching the best linear velocity of gas production,and reasonable and can reduce
leakage in the compression, compression ratio under the same flow, two-stage compression than single stage compression energy
saving 15% on average.

 

Model	Motor power  KW	Exhaust pressure Mpa	Volume flow m³ / min	Air Outlet	KG	Dimensions (L x W x H)
DMG-7.5FPM	7.5	0.8	1.2	G1/2	240	870 x 720 x 920
DMG-11FPM	11	0.8	1.5	G3/4	450	1080 x 750 x 1000
DMG-15FPM	15	0.8	2.4	G3/4	450	1080 x 750 x 1000
DMG-22FPM	22	0.8	3.5	G1	620	1040 x 880 x 1250
DMG-30FPM	30	0.8	5.0	G1	620	1040 x 880 x 1250
DMG-37FPM	37	0.8	6.2	G1-1/2''	850	1250 x 1000 x 1400
DMG-45FPM	45	0.8	8.0	G1-1/2''	850	1250 x 1000 x 1400
DMG-55FPM	55	0.8	10.0	G1-1/2''	1000	1500 x 1125 x 1480
DMG-75FPM	75	0.8	13.0	G2''	1150	1700 x 1200 x1600
DMG-90FPM	90	0.8	16.0	DN65	1560	1900 x 1300 x 1900
DMG-110FPM	110	0.8	20.0	DN65	1560	2250 x 1500 x 1900
DMG-132FPM	132	0.8	24.0	DN65	1760	2250 x 1500 x 1900

Reference conditions : temperature : 20°c suction pressure : 1 bar (abs) relative humidity : 0%
Standard constraints : height : 1000 m standard equipment : highest temperature 40°c standard options : 
The Company's products continue to improve, to retain right of design change.Parameters change, without prior notice.

更多 DMG KOMPRESSOREN (SEA) SDN BHD 相关资料