CTT-300 Torque Tester | Alluris by Muser: 马来西亚的首选 Muser Apac Sdn Bhd

详情

Alluris CTT-300 Torque Tester

Features

Automatic detection of two peak values >> for torque testing of caps with lock ring.
Limit value monitoring >> with pass /fail detection for both peak values.
Internal memory >> for the evaluation of test series.
Exchangeable centering base plate >> robust, stable and protected against dripping water (IP42).

Description

Digital Cap Torque Tester CTT-300 series with automatic detection of two peak values are designed for quick, manual torque testing of tamper evident closures. The cap is opened manually and the maximum torque for loosening the cap and for breaking the safety ring are detected separately. For both peaks limit values can be defined, which are monitored and displayed during the measurement.

The device has an internal memory with statistic function and an USB interface. Using the software FMI_Analyze torque curves can be visualized and limits are monitored via PC.

The housing complies with protection code IP42 and the torque sensor is protected against overload up to max. ± 20 Nm. With its compact design, the instrument is designed for desktop application. It may be screwed on table tops (maximum thickness 30 mm) to protect against slipping.

Technical Specifications

		Order No.
		CTT-300B2	CTT-300B5	CTT-300C1
Measuring range	M(n)	0-2 Nm	0-5 Nm	0-10 Nm
Resolution	Res(n)	0.002 Nm	0.005 Nm	0.01 Nm
Accuracy	@ 23 °C (F.S.)	+/- 0.5 % (+/- 1 digit)
	Tk [offset]	Automatic taring (Auto-Tara)
	Tk [relative (F.S.)]	+/- 0.02 %/K
Measuring principle		Bidirectional strain gauge with high-speed μ-Prozessor
Operation modes	Standard	Real time value
	Peak	Torque peak (drag indicator function)
	Double Peak	Two consecutive torque peak values ( drag indicator function )
	Limit values	2 separately selectable limit values for both peaks (each with upper/lower limit)
Overload	Max. admissible	± 20 Nm
	Max. display range	120 % (max. Tara 20 % of M(n))
Display	Type	LCD, 5-digit, 29 mm high \| Status-LED switching between red/green
Interfaces	USB	USB 2.0 data communication and power supply
	Hirose	Limits/switch signals, digital I/Os, trigger, power supply for external devices (requires optional cable)
Software	FMI-Analyze	Data analysis on PC
	COM-Bridge	Data transmission (e. g. to CAQ-Software)
Memory	Single values	Up to 1000 measuring values \| Statistic function
Power supply		Internal solar-cell with storage capacitor \| via USB
Temperature range	Operation	0…40 ˚C
Housing	Weight	ca. 5000 g
	LxWxH	280x170x95.3 mm
	Fixation	On tabletops up to 30 mm depth (two holes with threaded bolts and lock nuts on the bottom)
Max. clamping range		Ø 25 - 180 mm
Protection code	(without cable)	IP42 (Protection against dripping water up to 15° tilt devices)

Downloads

更多 Muser Apac Sdn Bhd 相关资料