Applications For metal/metal combinations with slow to medium fast movements and high loads. Both the liquid coating and aerosolized spray have been used for improving the running-in process and for lubrication of plain bearings, bushings and sleeves, power screw drives, threaded connections/fasteners, and high voltage switches – even under high vacuum and at extreme temperatures.
Additionally, MOLYKOTE D-321 R Anti-Friction Coating is used frequently for slides, guides and tracks.
MOLYKOTE D-321 R Anti-Friction Coating Spray is frequently used on hard to reach surfaces or for emergency boundary lubrication as well as on chains or as a multi-purpose penetrant.
How to use
Surface preparation First, clean and degrease the surface that will be coated with MOLYKOTE D-321 R Anti-Friction Coating or MOLYKOTE D-321 R Anti-Friction Coating Spray. Phosphatization or sandblasting (180 grit) increases the adhesion and service life.
How to apply Bulk liquid MOLYKOTE®D-321 R Anti-Friction Coating should be stirred or rolled thoroughly before applying by brushing or spraying.
Typical properties Specification writers: These values are not intended for use in preparing specifications. Please contact your local MOLYKOTE® sales representative prior to writing specifications on this product.
Contact our sales consultant in area:
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at [email protected]. 更多 Davor Sdn Bhd 相关资料
Davor Sdn Bhd雪兰莪 (Selangor) 高级润滑脂和油供应商，吉隆坡 (KL) 工业润滑油、马来西亚 (Malaysia) MRO 喷雾产品、润滑器和设备, 食品级润滑油 ~ Davor Sdn Bhd
.png)
Malaysia
