MULTIPROCESS WELDERS

Model: XMT^® 350 MPa Multiprocess Welders

PROCESSES

• MIG (GMAW)/Pulsed MIG (GMAW-P)
• Stick (SMAW)
• Flux Cored (FCAW)
• Air Carbon Arc (CAC-A) Cutting and Gouging

APPLICATION

• Manufacturing Industrial
• Construction
• Shipbuilding
• Railroad
• Truck and Trailer Manufacturing
• Fabrication
• Repair Shops
• Rental Fleets

FEATURES

• XMT® 350 MPa expands the process capability of the XMT® Series, with built-in Pulsed MIG operation. MPa stands for MIG, Pulse, advanced arc control. The advanced arc control provides:
  Improved pulsed MIG welding.
  More control over the puddle and weld bead using SharpArc®.
  More robust and stable arc at very low arc lengths.
  Reduces heat input
  Welds on a wider range of material thicknesses.
   
• Sharp Arc® on the XMT® 350 MPa:
  Can handle virtually any welding job, including those hard-to-weld alloys found at power generation plants and shipbuilding facilities.
  A low setting gives a more fluid puddle and a flatter bead appearance.
  A high setting gives a less fluid puddle and a ropier bead appearance.
  Can be adjusted to help customize the arc for the type of shielding gas being used.
   
• Auto-Line™ Power Management technology allows for any input voltage hook-up (208-575V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable input power.
• 350 amps of welding output at 60% duty cycle enables improved deposition through using larger diameter electrodes common in construction applications.
• Available with Dinse or Tweco-style output connectors .
• Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.
• Exceptional electrical efficiency. At 400 amps, efficiency is 87.24%, this helps to reduce the utility bill or fuel supply required to weld.
• Inverter arc control technology provides greater puddle control for superior 6010 Stick electrode performance.
• Auto Remote Sense enables unit to automatically use remote control if connected to remote control receptacle.
• Reduced OCV operation - an internal dip switch enables reduced open-circuit voltage Stick welding capability. OCV is typically below 15 volts.
• Process selector switch reduces the number of control setup combinations without reducing any features.
• Large, dual digital meters are easy to view and presettable to ease setting weld output.
• Lightweight, aerospace-grade aluminum case offers protection with the benefit of reduced weight.
• Wind Tunnel Technology™ Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability.
• LVC™ Line Voltage Compensation Keeps output of the power source constant regardless of fluctuation in input power +/- 10%.
• Fan-On-Demand™ Internal power source cooling system that only works when needed, keeping internal components cleaner.
• Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.
• Lift-Arc™ Simply touch the tungsten to the work piece and the arc is initiated instantly and automatically without the use of high frequency.
• Optional 115 VAC auxiliary power provides 10 amps of circuit-breaker-protected power for water circulators, etc.