High Temperature Gasket Marker
- Durable and Flexiber
- High Torque and Vibration Applications
- Guaranteed no leak
- Low Odor and Non-Corrosive
Ideal for :
Metal,Rear Valve Cover,Oil Pan,Timing Cover,Water Pump,Thermostat Housing,Transmission Oil Pan etc.
BOSSMAN Red RTV Silicone Gasket Maker is formulated for dealership warranty compliance. It features sensor-safe, fast curing, low odor, and non- corrosive formulation that meets performamce specs of OE silicone gaskets. It forms reliable "formed-in-place" gaskets that resist cracking, shrinking and migration caused by thermal cycling. It is remains permanently flexible and stable at temperature of between -80°F to 650°F (-62°C to 343°C). It is also highly resistant to automotive fluids.
DIRECTION:
1. Surfaces must be clean, dry and oil free.
2. Pierce seal at the end of the metal tube with reverse end of cap.
3. Screw on nozzle and cut to desired bead size.
4. Apply even bead (1/16" surface. 1/8") around perimeter of
5. Assemble part once silicone skinned (~15 minutes).
6. Remove excess silicone. Do not squeeze silicone by overtighten bolt.
7. Clean nozzle, replace cap after use.
8. Silicone fully cured in 24 hours.
SAFETY DIRECTION:
Avoid contact with eyes and skin and avoid breathing its vapor. Uncured adequate ventilation. ilicone cause irritation.
Use with CAUTION:
If poisoning occurs, contact doctor. If swallowed, do not induce vomiting, drink a glass of water and seek for medication. If skin contact occurs, quickly remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open, flush with water for at least 15 minutes and see a doctor immediately.
