Multi-rotor UAV Polymer Folding Propeller MF2815

Multi-rotor UAV Polymer Folding Propeller MF2815
Hard X.Carbon Principle: Propellers of light weight, durable density and small moment of inertia.
The easy choice: clear naming convention lets you choose the most suitabl propeller easily.
Original Technology: continuous reform and improvement in injection-molding and hybrid technology of carbon fiber and polymer set a higher standard for x-carbon propellers.
It is 1.5 times abrasion resistance of propeller surface, reduction of 3.5% of material density, and 2 times of propeller strength.


Each propeller is challenging the limit of injection technology and mold for 0.25mm trailing edge, airflow interference reduction and lift-drag ratio increase.



Heat insulating coating of high shading degree is employed to the surface to protect propellers from ultraviolet. The propeller material of heat endurance enables long time flight under high temperature.

Technology Behind X.Carbon

CFD Fluid Simulation

The ideal aerodynamic interaction is achieved with the help of T-Motor propeller performance forecast program. The final propeller design came out from more than 10 candicates after comparison on targeted working conditions.

CAE Finite Element Analysis

Fluid-solid coupling technology is employed to analyse the structure by adding load distribution of fluid simulation onto the propeller for tangible monitoring over the condition of eash part.

Topology Optimization Design


 T-Motor atatches much significance to topology optimization technology structure simplification. A preferred design was obtained from specific strength scheme after CAE finite element analysis for infinite potential in limited space.

Energy Snubber Technology

T-Motor energy-snubber technology is adopted to the whole series to protect the motors when propellers are attached by extreme impact. The structural deformation will absorb the energy from impact.

 

Customized PTFE spacer for longer service life.
Same steel as motor shaft is adopted to prevent spindles and screws from bending.

Propeller connector made of 7075 aluminium alloy with anodizing treatment is light, tough and rustless.

Ideal Combination with T-Motor ALPHA ESCs and Motors

R&D team from T-Motor optimized the magnetic circuit design of the corresponding motors and ALPHA ESCs for superb experience from control of fast response.

Superior Texture: Meticulous treatment behind the propellers. A 100,000-time folding test was carried out to ensure the craft and quality to the best of it.