VEGA | Radar | VEGAPULS 61....68 |
Guided Microwave | VEGAFLEX 61....67 | |
Ultrosonic | VEGASON 61....65 | |
capacitive | VEGACAL62....67, VEGACAP62....67 |
Radar | ||
VEGAPULS: Level measurement with Radar | ||
|
VEGA has been a technology leader in the area of radar level measurement for many years. In almost every industrial process, the levels of liquids, muds, pastes, powders and bulk solids have to be measured continuously in tanks, silos, containers and pipelines.
|
|
Guided microwave |
||
VEGAFLEX: Universal sensors for bulk solids and liquids |
||
High frequency microwave pulses are coupled on a cable or rod and guided along the probe. The pulse is reflected by the product surface and received by the processing electronics. This electronics evaluates the echo signal and converts it into a level information. All instruments are preset to the ordered probe length. The shortenable cable and rod versions can be adapted to the individual conditions on site.
|
||
Ultrasonic | ||
VEGASON: Contactless measurement with ultrasonics |
||
Short ultrasonic impulses in to range of 10 to 70 kHz are emitted by the transducer to the measured product, reflected by the product surface and received again by the transducer. They spread with sound velocity. The time from emission to reception of the signals is proportional to the level in the vessel. The proven ECHOFOX signal processing filters out the correct level echo reliably from a number of false reflections. An adjustment with empty and full vessel is not necessary!
|
||
Capacitive | ||
VEGACAL series 60: Level measurement in solids and liquids |
||
The proven capacitive measuring principle is one of the most common measuring principles for level measurement in the industrial measurement technology. Sensor and vessel form the two electrodes of a capacitor. A capacitance change caused by a level change is processed by the integrated electronics and converted into a switching signal.
|
||
VEGACAP series 60: Level detection in solids and liquids |
||
Sensor and vessel form the two electrodes of a capacitor. A capacitance change caused by a level change is processed by the integrated electronics and converted into a switching signal. Due to cable and rod versions, suitable instruments are available for all applications. Because the capacitive measuring principle requires no special installation and mounting, a number of applications can be equipped with these level switches.
|
||
VEGABAR series 10: Pressure measurement in gases and liquids |
||
The measuring ranges of pressure transmitters start at a few millibar and reach up to several hundred bar. Pressure transmitters from VEGA are equipped with metallic or ceramic measuring cells and offer excellent long-term stability as well as high overload resistance.
|