We are your one-stop laboratory partner in Malaysia. NATTEST LAB SDN BHD provides comprehensive solutions to assist our valued customers in the selection of the right system that fits their specific needs.
Tinggalkan mesej dan dapatkan penyelesaian yang disesuaikan untuk keperluan anda. Peniaga kami akan menghubungi anda tidak lama lagi.
https://www.nationaltestlab.com/category/structural-monitoring/
https://www.nationaltestlab.com/category/structural-investigation/
https://www.nationaltestlab.com/category/non-destructive-test/
https://www.nationaltestlab.com/category/geotechnical-investigation
https://www.nationaltestlab.com/category/project-laboratory-rental
https://www.nationaltestlab.com/mechanical-mini-lab
Mechanical Mini Lab rental solution is intended to help projects that require extensive mechanical testing without the requirement for a full-scale permanent laboratory.
https://www.nationaltestlab.com/soil-mini-lab
The Soil Mini Lab is a tiny but fully functioning solution for geotechnical testing on the project site.
https://www.nationaltestlab.com/mega-project-site-lab
For large-scale infrastructure and industrial projects, Mega Project Site Lab provides a full-service, multi-disciplinary laboratory that is located right on site.
https://www.nationaltestlab.com/concrete-mini-lab
Concrete Mini Lab is intended to provide dependable, on-site quality control for concrete components and mixtures.
https://www.nationaltestlab.com/infrastructure-project-site-lab
Infrastructure Project Site Lab is designed for medium to large-scale public and private sector infrastructure projects
https://www.nationaltestlab.com/charpy-impact-test
Assesses the impact toughness of metallic materials by measuring the energy absorbed during fracture under sudden loading, especially at varying temperatures.
https://www.nationaltestlab.com/pc-strand-tensile-test
Determines the ultimate tensile strength and elongation of prestressed concrete (PC) strands, crucial for ensuring performance in tensioned structural applications.
https://www.nationaltestlab.com/mechanical-coupler-tensile-test
Tests the tensile strength of mechanical rebar couplers to ensure the joined bars meet structural load requirements and maintain continuity in reinforced concrete.
https://www.nationaltestlab.com/hardness-testing
Measures a material’s resistance to surface deformation using methods like Brinell, Rockwell, or Vickers, commonly applied to metals and alloys for quality control.
https://www.nationaltestlab.com/brc-weld-strength-test
Verifies the strength of welded joints in prefabricated BRC (British Reinforcement Concrete) mesh panels, ensuring weld integrity and performance under load.
https://www.nationaltestlab.com/rebar-bend-test
Assesses the ductility and flexibility of rebar by bending it to a specified angle without cracking or breaking, ensuring its suitability for structural use.
https://www.nationaltestlab.com/rebar-tensile-test
Determines the tensile strength, yield strength, and elongation properties of reinforcing bars to verify compliance with structural specifications and material standards.
https://www.nationaltestlab.com/rebar-rebend-test
Evaluates the rebar's ability to withstand bending and rebending, simulating fabrication and construction stresses to confirm material ductility and durability.
https://www.nationaltestlab.com/noise-monitoring
Measures ambient and construction-related noise levels using sound level meters to assess compliance with regulatory limits and minimize environmental disturbance.
https://www.nationaltestlab.com/vibration-monitoring-test
Tracks ground or structural vibrations generated by construction, traffic, or machinery using geophones or accelerometers, ensuring compliance with safety and environmental standards.
https://www.nationaltestlab.com/extensometer-test
Measures displacement and deformation between fixed points in soil or rock to monitor ground settlement, tunnel convergence, or structural expansion and contraction.
https://www.nationaltestlab.com/piezometer-test-eg-pneumatic-standpipe-types
Measures pore water pressure within soil or rock masses, aiding in the assessment of slope stability, seepage control, and the performance of earth structures like dams and embankments.
https://www.nationaltestlab.com/inclinometer-test-slope-or-elevation-angle-measurement
Monitors lateral ground movement and slope stability by measuring changes in inclination within a borehole, critical for landslide assessment and excavation safety.
https://www.nationaltestlab.com/crack-monitoring-test-tiltmeter
Utilizes tiltmeters to measure angular changes across structural cracks or joints, enabling the detection of movement trends and structural instability in buildings or infrastructure.
https://www.nationaltestlab.com/settlement-monitoring-gsm-bsm
Tracks vertical ground or structural movement over time using Geodetic Settlement Markers (GSM) and Building Settlement Markers (BSM), providing early warning of differential settlement or subsidence.
https://www.nationaltestlab.com/pile-dynamic-test-pda-test
Evaluates pile capacity, integrity, and driving stresses during installation or re-strike using sensors that measure force and velocity, allowing real-time analysis and verification.
https://www.nationaltestlab.com/pile-integrity-test-pit
A low-strain, non-destructive test that assesses the integrity and continuity of piles by analyzing the response of the pile head to a light impact, identifying potential defects or changes in cross-section
https://www.nationaltestlab.com/pile-cross-hole-sonic-logging-test
A non-destructive integrity test for bored piles that uses ultrasonic pulses between access tubes to detect internal flaws such as voids, cracks, or segregation in the concrete.
https://www.nationaltestlab.com/static-pile-load-test
A direct method of assessing the axial load-bearing capacity of a pile by applying a controlled static load and measuring settlement, providing essential validation of pile design.
https://www.nationaltestlab.com/bidirectional-pile-load-test
A full-scale load test that applies axial loads in two directions using embedded hydraulic jacks to evaluate the load-carrying capacity of deep foundations without requiring large reaction systems.
https://www.nationaltestlab.com/cement-grouting
Injects cement-based slurry into cracks, voids, or weak soils to improve strength, seal leakages, and enhance ground or structural stability.
https://www.nationaltestlab.com/structure-jacketing
Improves load capacity and confinement of columns or beams by encasing them in reinforced concrete or steel jackets, often used in seismic retrofitting.
https://www.nationaltestlab.com/design-calculation-for-strengthening
Involves detailed structural analysis and engineering calculations to develop safe and effective strengthening strategies for existing buildings or elements.
https://www.nationaltestlab.com/fibre-wrap-concrete-frp-wrapping
Uses fiber-reinforced polymer (FRP) composites to wrap structural members, enhancing their strength, ductility, and seismic resistance without significant added weight.
https://www.nationaltestlab.com/structural-concrete-repair
Restores damaged or deteriorated concrete elements using patching, replacement, or epoxy injection to regain structural performance and durability.
https://www.nationaltestlab.com/internal-skimming
Provides a smooth and even finish on interior walls and ceilings using thin layers of plaster or skim coat, ideal for painting and decoration.
https://www.nationaltestlab.com/foundation-waterproofing
Protects structures against water ingress by applying waterproofing membranes, coatings, or injection systems to foundation walls and below-grade elements.
https://www.nationaltestlab.com/render-and-plastering
Applies cement-based or gypsum coatings on internal and external surfaces to provide smooth finishes, protect walls, and improve aesthetics.
https://www.nationaltestlab.com/crack-repair
Seals structural and non-structural cracks in concrete or masonry using injection methods or flexible sealants to restore strength and prevent further deterioration.
https://www.nationaltestlab.com/strengthening
Enhances the load-carrying capacity and durability of existing structures using advanced techniques such as jacketing, FRP wrapping, and steel plate bonding.
https://www.nationaltestlab.com/foundation-wall-and-beam-realignment
Restores structural integrity by correcting displaced or misaligned foundation walls and beams through controlled lifting, shoring, and repositioning techniques.
https://www.nationaltestlab.com/pu-grouting-and-compaction-grouting
PU grouting stops water ingress by injecting polyurethane into cracks, while compaction grouting densifies loose soils beneath foundations to improve load-bearing capacity.
https://www.nationaltestlab.com/dye-penetrant-test
Detects surface-breaking defects such as cracks or porosity in metals and non-porous materials using a visible or fluorescent dye and developer process.
https://www.nationaltestlab.com/welding-test-radiographic-testing-rt
Evaluates the internal quality of welded joints by using X-rays or gamma rays to reveal internal flaws like porosity, cracks, or inclusions
https://www.nationaltestlab.com/magnetic-particle-inspection-testing
Detects surface and near-surface cracks in ferromagnetic materials using magnetic fields and iron particles to visualize defect locations.
https://www.nationaltestlab.com/concrete-carbonation-test
Determines the depth of carbonation in concrete using phenolphthalein indicator, which is critical for assessing corrosion risk to embedded steel.
https://www.nationaltestlab.com/full-scale-load-test
Applies actual service or design loads to structural elements or systems to evaluate load-bearing performance and validate design assumptions.
https://www.nationaltestlab.com/halfcell-potential-rebar-corrosion-test
Assesses the likelihood of corrosion in embedded steel reinforcement by measuring electrical potential differences on the concrete surface.
