D5000 series

General Features

• More than 25 modules suitable for SIL 3 applications according to IEC 61508, IEC 61511.
• Independent power supply circuit for each channel.
• Double units are equivalent to two single units because of the absence of common circuitry.
• Single channel versions available if required, to provide single loop integrity on Emergency Shut Down and Fire & Gas applications.
• Configuration components are easily accessed by removing cover.
• DIP switch configurability for easy field setup.
• LED indication for power, signal status and line fault conditions.
• Modules accept DC power supply over a wide range for 24 Vdc (20-30 Vdc) applications.
• Wide operating temperature range: -40 to +60/+70 °C.
• Installation in Zone 2 / Division 2.
• Certified for Offshore and Marine applications.

High performance

• High signal transfer accuracy and repeatability.
• Advanced circuitry provides very low heat dissipation, ensuring modules run cool despite their high density and functionality.
• SMD manufacturing to maximize lifetime and enhance reliability.
• Complete absence of electrolytic capacitors ensures minimum 20 years lifetime.

Wide functionality

• Wide range of digital and analog I/O.
• SIL 3 Safety Relay contacts rated for 4 A or 10 A for direct switching of high loads.
• Three port galvanic isolation to eliminate noise,ground loop problems and to provide Intrinsic Safety without a high integrity safety earth connection.
• Line fault alarm detects open or short circuit of field cables.
• Optional power bus DIN-Rail connector.
• Standard Termination Board, custom connectors for integration into customized Boards.
• EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.

Certifications and Approvals

• Intrinsic Safety Certification to CENELEC according 94/9/EC (ATEX).
• European Directives for EMC.
• SIL 2 and SIL3 modules according standards IEC61508 and IEC61511