Penerangan
Main advantages of this procedure
-
Transformer – Fully epoxy moulded H Class Insulation, Excellent resistance to humidity, dust and vibration
-
Seam Welders – are general purpose machines for boad carity welder or as conversion from spot welders.
-
High Visibility Transparent hoses – Transparents hoses are used, this helps the operator to view cooling water flow
-
Bottom Exhaust – air is discarged at the lower part of the machine, thereby reducing oil mist. This helps in keeping working environment clean.
-
Upslope circuit facility – Upslope circuit is a standard feature to achieve excellent welding with practically no flash
-
Weld interlock facility – A weld interlock is a standard feature to facilitate intial power receiving.
Specification
Rated Capacity (KVA)
100
Maximum Short Circuit Power (KVA)
387
Maximum Welding Power (KVA)
387
Nominal Power @ 50% Duty Cycle (KVA)
100
Nominal Supply Voltage (V)
415
Supply Frequency (Hz)
50/60
Supply Phases
3
Supply Capacity (KVA)
173
HRC Fuse Size to BD88 (A)
160
Feed Cable C.S.A up to 30. Along (mm)
270
Maximum Short Circuit Primary Current (A)
600
Duty Cycle For Maximum Welding (%)
50
Continuous Secondary Current @ 100% Duty Cycle (A)
20,000
Welding Cylinder (mm)
160
Weld Force min/max With 1.5/5.5 bar Supply (KN)
3.0/11.0
Welding Cylinder Stroke Maximum (mm)
76
Air Pressure Normal (bar)
5.5
Air Pressure Maximum Operating (bar)
7
Air Connection / Hose Size (BSP/in)
½” / ½”
Cooling Water minimum operating presure (bar)
3
Cooling Water (L/min)
25
Cooling Water Maximum Inlet Temperature Operating Pressure (°C)
30
Cooling Water Connection / Hose size (BSP/in)
½” / ¾”
Lebih maklumat tentang Exa Welding (M) Sdn Bhd
Malaysia
