Test chamber is for PV modules (solar panels) thermal cycling, humidityfreezecycle, and damp heat RH testing, to test whether PV modules can withstand high temperature with humidity and low temperature, to test its fatigue andthermal failure after temperaturerepeatedchanges, to confirm its thermal stress PV modules generated under high humidity circumstance and capability of long-termresistance tomoisturepenetration. This test chamber is widely used in solar panels testing.
Specification
| Temperature range | -60℃～100℃ |
| Temperature fluctuation | ±0.5℃ |
| Temperature deviation | ±2℃ |
| Humidity range | 20%~98%RH |
| Humidity deviation | +2、-3%RH |
| Rise / Fall speed (℃) | 1 ~ 3.4 ℃/min |
| Exterior material | Steel Plate with protective coating |
| Interior material | SUS304 stainlesssteel |
| Insulation window | Double thermo stability silicone rubber sealing |
| Air circulation | Cold resistance and low noise centrifugal fan and motor |
| Safety protection system | Humidifierdry-combustion protection, independent over-temperature protection, water shortage protection, over-current protection, refrigerant high-pressure protection switch, over-current circuit breaker, earth leakage protection and so on |
| Power supply | AC 380V 50HZ; |
| Standard | IEC61215, IEC61646, IEC61108, IEC62688, UL1703 |
Malaysia
