Penerangan
MZ meters are flow. The flow of gas turns the turbine wheel, and thus the rotating speed of the turbing is proportional to the linear speed of the gas.
The movement is mechanically transmitted to the totaliser through a magnetic coupling.
Key Benefits
- High accuracy budget meter
- Flow rate up to 2500m3/h
- Pressure range up to 40 bar
- Equipped as standard with the cyble target
- Various options available: Low and high frequency transmitters, thermowell, oil pump, version for agressive gases, etc
Applications
MZ meters are designed to measure natural gas, and various filtered, and non-corrosive gases.
They are used to measure low to medium and high flow, at low or medium, or high pressure.
They have been especially designed for industtial use and for secondary measurement.
The possibility of fitting various options such as the oil pump or the PTFE coating version, means that they are also suitable for use in heavy duty measurement.
Specification
| Intrinsic Safety Approval |
L. C. I. E 06 ATEX 6031 X |
| Flow Rate |
From 6 m3/h to 2500 m3/h |
| Nominal Diameters |
From DN 2'' to 8'' DN50 to DN200 |
| Material |
Ductile iron |
| Compliant with the pressure equipment directiv 97/23/EC |
| Maximum Working Pressure |
Up to 40 bar depending on flanging |
| Temperature Range |
Ambient: |
-30ºC to +60ºC |
| Gas: |
-30ºC to +60ºC |
| Storage temperature: |
-40ºC to +70ºC |
| Metrology |
The tolerance of acceptation is +/-1.5% from Qmin to Qmax. |
Lebih maklumat tentang EDB Perkasa Sdn Bhd
Malaysia
