Plastic measuring system, easy setting, traditinal dial change-over system Rockwell Hardness Tester for Rockwell Hardness Testing by MSP Metrology (M) Sdn Bhd from Matsuzawa Japan
Digital rockwell hardness tester RMT series
A pioneer of digital Rockwell hardness tester
Rockwell hardness tester of Matsuzawa continues pursuing usability anyone can easily operate Rockwell hardness tester of Matsuzawa
Loaded with a Color LCD display with backlight. The hardness tester secure very clear and high visibility.
You can easily confirm depth on a measuring mode display.
AUTO START
– After setting the reference load, the test load is applied automatically.
– The manual start is also possible
EASY SETTING
– Reference load can be easily set with a bar graph display on the bright screen and electronic sound.
– More over, an error-preventing device is also mounted.
PLASTIC MEASURING SYSTEM
– Specific measuring method for plastic in compliance with ASTM and JIS activated by one-touch easy operation.
– Time for reading the value the after unloading the test load can be set freely.
VARIOUS DATA PROCESSING FUNCTION
– It makes acceptance and rejection judgement, conversion to other tabulation and computing for data memory(999 data), maximum value, variation, average, standard deviation etc.
APPLICABLE TO CE & SAFETY
– Safety design applicable to EU low voltage command,EMC command and machine command. In addition to high-rigidity body.
– Overturn-preventive metal fittings are attached as standard to prevent overturing by earthquakes etc.
TRADITIONAL DIAL CHANGE-OVER SYSTEM
– Dial changeover systems make change the test load easily by turning the dial. Accordingly the design is dust-proof including the weights for test load.
| ITEM | RMT-3 | RMT-1 | ||||||
| Preliminary Test Force | 29.42 98.07 N | 98.07 N | ||||||
| 3 10 kgf | 10 kgf | |||||||
| Test Force | RMT-1 | 588.4 980.7 1471 N | ||||||
| 60 100 150 kgf | ||||||||
| RMT-3 | 147.1 294.2 441.3 588.4 980.7 1471 N | |||||||
| 15 30 45 60 100 150 kgf | ||||||||
| Preliminary Test Force Setting | LCD Graph and Electronic Signal Monitoring fine adjustment is unnecessary. | |||||||
| Test Force Control | Automatic (Loading → Holding → Release) | |||||||
| Start Operation | Automatic Start/Manual Start Selection | |||||||
| Test Force Dwell Time | 3 ~ 99 sec | |||||||
| Plastic Test Function | Standard function, time up to hardness value display after release: 3 ~ 99 sec | |||||||
| Test Scale | 15N 30N 45N 15T 30T 45T 15W 30W 45W 15X 30X 45X 15Y 30Y 45Y | C D A G B F K E H P M L V S R | ||||||
| C D A G B F K E H P M L V S R | ||||||||
| Data Output | Centronics (Standard) | |||||||
| RS232C or Serial Output selectable (Factory setting RS232C) | ||||||||
| Data Memory | Max. 999 Test Data | |||||||
| Hardness Conversion | Based on SAE J417B, ASTM E140 | |||||||
| OK/NG Criteria | Upper and Lower Limit setting and HI/OK/LOW display | |||||||
| Statistical Calculation | Batch conversion of memorized data. (Max. value, Min. value, dispersion (R), mean value) | |||||||
| Converted Value, same too | ||||||||
| RS232C Communication Line | Baud Rate: 1200/2400/4800/9600 bps selectable | |||||||
| Error detection: Parity even/Parity none selectable | ||||||||
| Accuracy | Conform to JIS B7726 and ASTM E-18 | |||||||
| Max. Specimen Height | 200mm | |||||||
| Max. Specimen Depth | 165mm | |||||||
| Dimension | W220 x D540 x H830mm | |||||||
| Weight | 100kg | |||||||
| Power Supply | Single Phase AC100 ~ 240V 50/60Hz available for export models | |||||||
Lebih maklumat tentang MSP Metrology (M) Sdn Bhd
Malaysia
