EEPM-CIRA Series

Suitable for use on Vertical Lathe, CNC 5 Axis Machining Center ...etc.

Features & Specification

Dimension of screw holes for setting up
 

Features

1. Round type and radiate magnetic poles, suitable for clamping round type and any form of workpiece machining.
2. Workpieces can be touch to all poles of Magnetic Chuck, super power magnetic force as minimum of 1340Kgf (I.34tons) ±5% and maximum of 60,400Kgf (60 tons)±5%, it depends on size of workpiece and magnetic chuck.(Please refer to the spec. list)
3. 1~10 seconds control for power ON & OFF. No electric power supply required to keep the magnetic chuck ON, cable can be taken off for turning chuck freely while machining.
4. Un-obstructed movement of cutters during machining, the really functions of 5 side machining on workholding.
5. Design of Electric-Permanent, never gets temperature to effect the accuracy of workpieces.

Applications

1. Suitable in use for combine with Vertical Lathe, CNC 5 Axis Index Device, CNC 5 Axis Machining Center ...etc.
2. Minimum dimension of workpiece required as：
   - EEPM-CIR500-φ300mm ；EEPM-CIR600-φ360mm 
   - EEPM-CIR800-φ500mm ；EEPM-CIR1000-φ500mm
   - EEPM-CIR1250-φ850mm；EEPM-CIR1500-φ850mm 
   - EEPM-CIR1600-φ1200mm ；EEPM-CIR1800-φ1200mm
   or same dimensions of any other forms of workpiece.
3. More functions for cooperate with induction plate, can do positioning on workholding.

1. Induction Block EEPM-CIRIB series are use for EEPM-CIR chucks, can do many more functions on workholding.
2. Convenience and Accuracy: Induction Block are interchanging & consuming accessories, you can machining surface or forming induction blocks for the workpiece required by the machine directly, so the parallelism of induction block will always 100% match to the machine.