Penerangan
A versatile hand kneadable, fast setting, non-rusting co-extruded epoxy repair system that can be used for repairing ferrous and aluminum metal items. It comes in a handy roll form, with the black hardener encapsulated in the grey resin part. The product hardens in 5-10 minutes, after mixing, to a black metal-like material.
Features
-
Will not sag, run or drip
-
Easy to use - no mess
-
Can be drilled, sawed, sanded, filed, tapped, machined or painted one hour after mixing
-
Good adhesive strength
-
Can be used to reshape, rebuild and repair a multitude of surfaces and applications
-
Good gap filling properties
-
Long-lasting, durable solution
-
Heat resistant to 120°C continuously or 140°C intermittently
-
Can be used under water. (but dry surfaces for application are best and recommended)
-
Rapid set time (<10 minutes)
-
Can be used for fuel resistant repairs.
Ideal for
-
Steel
-
Wide range of terrous metal and aluminum items
-
Most plastics (pre-test required)
-
Glass
Direction
-
Clean surface free of grease, dirt and dust. For best results roughen bond area prior to cleaning.
-
Cut off required amount. Replace disc on remaining portion. Use gloves to avoid messing hands. To mix, knead with fingers to a uniform colour. If mixing is difficult, warm to room temperature.
-
Apply to surface to be repaired (within 2 minutes of mixing) and mould to shape if required.
-
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
-
Trim away any excess before initial hardening. Remove any residues with acetone prior to initial hardening. Hardened excess may be sanded or trimmed away once fully cured.
-
After 5-10 minutes Knead-It Multi Purpose will harden and begin to form a strong bond.
-
After 60 minutes Knead-It Multi Purpose may be drilled, sanded, machined, filed, sawed or painted.
-
Wash hands thoroughly with soap and water before product hardens.
Safety tips
-
Where possible wear protective gloves when using Knead-It Multi Purpose. Contact with skin may result in irritation. Epoxy resin is a known skin sensitiser. Repeated or prolonged skin contact may lead to allergic contact dermatitis.
-
If redness or swelling of skin occurs, wash thoroughly with soap and water. Seek medical attention if in any doubt.
-
Mixed and cured material is not hazardous. Cured material can only be removed by cutting and abrasion. If cured on skin, it will peel off in a few days without assistance. Soaking in warm water will assist removal.
Lebih maklumat tentang Safety Solutions (M) Sdn Bhd
Malaysia
