Pedrollo Pressure Control 1HP, 1.5Bar, 10A EasyPress1(1.5)

Model: EasyPress1(1.5)

• Suitable for waterpump from 0.5HP to 1HP (single phase).
• Maximum delivery height: 15meters.

Installation & Use

• The EASYPRESS series consists of electronic devices designed to start (when a tap is turned on) and stop (when a tap is turned off) single-phase pumps.
• The microprocessor protects the pump from dangerous working conditions, such as dry running, and allows the pump to be re- started either automatically or manually.
• It also prevents the pump from starting-up too often when small leaks are present within an installation.

Performance Range

• Max flow rate: 200 l/min (12 m3/h)
• Working pressure: 10 bar
• Start-up pressure: 1.5 bar

Applications Limits

• Maximum liquid temperature +65 °C
• Ambient temperature up to +40 °C
• Burst pressure > 40 bar
• Protection: IP 65 • VOLTAGE: 230 V - Frequency: 50/60 Hz
• Max current: 
  a) 10 A EASYPRESS I 
  b) 16 A EASYPRESS II

Start-Up Pressure

• There are three different models available to choose from.
• Each with a different start-up pressure and easily identified by the coloured cap.
• It positioned at the rear of EASYPRESS, suitable for delivering supply to different heights.

Construction & Safety Standards

• The easy to replace, resin sealed circuit board offers complete protection from the effects of humidity and is housed in an IP 65 case. 
• The EASYPRESS circuit board has passed the most stringent EMC tests for electromagnetic compatibility (low interference emission and high disturbance immunity), guaranteeing reliable operation in any environment.

Specifications