Penerangan
Megapoxy High Impact Crusher Backing is a two component pourable epoxy grout suitable for:
-
Backing Crusher Parts
-
Grouting Machinery
-
Locking Bearings
-
Setting Anchor Bolts
-
Chocking of Machinery
Description
Part “A” is a white low viscosity liquid and is packed in a re-sealable plastic bucket.
Part “B” is a blue coloured liquid and is packed in a screw capped plastic bottle.
Accelerator is a clear brown liquid and is packed in a 250 ml. tin.
Method of Use
-
Seal all crevices with putty (such as Megapoxy PF Rapid set putty) so that backing mixture does not leak out.
-
Make certain no settling has occurred in the resin by stirring, then add the hardener (Part “B”) slowly with continual mixing.
-
Using low speed electric drill, mix well, but do not aerate.
-
Mix until uniform colour is obtained.
-
The mixture must be used immediately after mixing.
-
If ambient temperature is high, the kits should be stored in as cool a place as possible. High ambients will lead to greatly shortened usable life.
-
If topping up is required, then this can be carried out at a later date when it is convenient.
-
If adhesion is not required, one or both surfaces should be coated with wax or grease based release agent.
-
Allow Megapoxy HICB to harden before returning crusher into service.
