1.According to JIS standards.
2.Pin surface adopted titanium alloy processing to enhance friction resistance.
3.Part of cylinder front cover has equiped with metallic rod wiper that can effectively remove slag and debris etc.
4.Possible to mount on 4 surfaces.
5.With sensor groove around cylinder body, easy to mount sensors.
1.Before piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil and other debris inside the pipe
2.Operating fluid need to be filtered by 40um filter element.
3.During low temperature environment, cryogenic measures should be taken to prevent freezing water in the system.
4.Beware of the surface rust on the cylinder after disassemble for a long time. Dust cover should be added on inlet port and apply anti-rust oil on rod and action part.
5.Please attach a meter-out controller at the port to protect product life of cylinder and jig.
|
AQK50 ( Basic Type ) |
| Pin Diameter | Without shims | With shims |
| Ø14.□（hole of workpieceØ15） | ||
| Ø15.□（hole of workpieceØ16） | ||
| Ø17.□（hole of workpieceØ18） | ||
| Ø19.□（hole of workpieceØ20） | ||
| Ø24.□（hole of workpieceØ25） |
|
BAQK5 ( With Lock ) |
|---|
| Pin Diameter | Without shims | With shims |
| Ø14.□（hole of workpieceØ15） | ||
| Ø15.□（hole of workpieceØ16） | ||
| Ø17.□（hole of workpieceØ18） | ||
| Ø19.□（hole of workpieceØ20） | ||
| Ø24.□（hole of workpieceØ25） |
