By working with probe detection and mechanical driving devices, the multi-channel digital ultrasonic flaw detector can achieve automatic ultrasound testing on section steel, such as steel tube, steel rod, steel billet and steel plate. SIUI may provide the system with different optional configurations (4, 6, 8 and 16 channels).
Superior Features
-
Multiple testing channels: multi-probes can be connected for testing at the same time.
-
High detection sensitivity.
-
Each detection channel has three alarm gates: A, B and C. An alarm threshold can be set, and when the echo is higher or lower than the threshold, the system will alarm, so as to achieve multi-position and multi-method auto alarm.
-
Interface wave tracking function: by tracking the logic relation between gate D and the alarm gates A, B or C, interface wave tracked by alarm gates is assured, which avoids error alarm or lost alarm in immersion testing due to water fluctuation.
-
Variable PRF, max. PRF as high as 2.5KHz/channel.
-
The automatic defect marking function can be set as delay marking or lengthened distance marking, with delay time or lengthened distance variable.
-
Relevant alarm times selection: the relevant alarm times can be selected based on the actual situation, so as to avoid error alarm and improve anti-interference capability.
-
Large memory for saving up to 500 data sets, including echoes, curves, parameters, detection reports, etc.
-
USB port for saving system stored data and echoes to a USB disk, as well as easy printout of test reports.
-
Large screen and high-brightness color TFT LCD, bringing optimized effect for reading & measurement.
-
Echoes and detection data for up to 4 channels can be displayed at the same time.
-
Text prompts during operation.
-
LAN Ethernet port of the multi-channel flaw detector for real-time communication with a PC and remote control.
-
Special database and powerful data processing function can be found in the PC, which is convenient for data storage, edit, classification, query, printing and transmission.
-
In combination with displacement signals of the tested material provided by a mechanical drive device, and flaw echo signals from the flaw detector, B-scan and C-scan display can be achieved in the PC, displaying flaw position and equivalent flaw size directly.
.jpg)
Malaysia
