TECLOCK – Durometer / Rubber Hardness Tester
Brand: Teclock
| Model | Type | Application / Materials | Conform Standards | Spring Load Value | Indentor Shape (mm) | Indentor Height |
| GS-719G | A (Peak Pointer Type) | General rubber(Medium hardness) | JIS K 6253ISO 7619ISO 868ASTM D 2240 | 550-8050mN (56.1-821.1gf) | Truncated Cone of φ 0.79with 35° angle | 2.50mm |
| GS-709G | A (Peak Pointer Type) | Soft Plastic/ General Rubber | JIS K 7215ISO 868ASTM D 2240 |
549-8061mN (56-822gf) |
||
| GS-706G | old Type A (Peak Pointer Type) | General Rubber | JIS K 6301 | 539-8385mN (55-855gf) | φ0.79 with 30°angleTruncated Cone | 2.54mm |
| GS-750G | B | Medium Hard Rubber | ASTM D 2240 |
550-8050mN (56.1-821.1gf) |
R0.1 with 30°angle Conical Cone |
2.50mm |
| GS-752G | DO | Medium Hard Rubber |
203-1111mN (20.7-113.3gf) |
R1.19 Conical cone | ||
| GS-751G | C | Hard Rubber |
0-44450mN (0-4533gf) |
φ0.79 with 35°angle Truncated Cone |
||
| GS-703G | old JIS C | Hard Rubber |
JIS K 6301 |
980-44100mN (100-4500gf) |
φ0.79 with 30°angle Truncated Cone |
2.54mm |
| GS-720G | D | Hard Rubber |
JIS K 6253 |
0-44450mN （0-4538gf） |
R0.1 with 30°angle Conical Cone |
2.50mm |
| GS-702G | D | Plastic/Hard Rubber |
JIS K 7215 |
0-44483mN (0-4536gf) |
R0.1 with 30°angle Conical Cone |
