The S3601 is a powerful and efficient Vector Network Analyzer widely used in industries like wireless communications, cable TV, and automotive electronics, etc.
| Frequency range 100 kHz - 3 GHz / 8.5GHz
| 125 dB wide dynamic range
| Various display formats
| Multiple calibration methods
| Standard interfaces including USB, LAN, GPIB, VGA
| Low noise level, good measurement performance
| Multi-window, multi-channel measurement display
| Measure communication products
| Passive multi-port device and balance device test
| Specifications | ||
| Model | S3601A | 3601B |
| Frequency Range | 100kHz - 3GHz | 100kHz - 8.5GHz |
| Frequency Resolution | 1Hz | |
| Frequency Accuracy | ±5×10-6 (23°C±3°C) | ±5×10-6 (23°C±3°C) |
| Output Power | -45dBm - 10dBm | -55dBm - 10dBm |
| Max. Dynamic Range | 125 dB | 125 dB |
| IF Bandwidth | 1MHz - 5MHz | |
| Number of Built-In Ports | 2 | 2 |
| Measurement Point | 1 - 16001 | |
| No. of Measurement Receiver | 4 | |
| Reference Level Amplitude Setting | Range: ±500dB; Resolution: 0.001dB | |
| Reference Phase Settings | Range: ±500°; Resolution: 0.01° | |
| Measurement Fields | Frequency domain and Time domain | |
| Display Format | logarithmic amplitude, linear range, standing wave, phase, group delay, smith chart, polar diagram | |
| Dimension (W x H x D) | 435×233×348 mm |
| Weight | 16 kg |
| Power Supply | 50 Hz 220 V AC / 60 Hz 110 V AC |
| Interface | N (F), 50Ω system impedance N (F), 75Ω system impedance (option 01) |
| Operation Temp. | 0 °C - +40 °C (32 °F - 104 °F) |
| Storage Temp. | -20 °C - +70 °C (-4 °F-158 °F) |
| Relative Humidity | <= 90 %rh |
| Option No. | Item | Description |
| S3601A-01 | 75Ω port impedance system | \ |
| S3601A-02 | N-type testing cable | (GORE-OSZKUZKU0240) Male - Male, 60cm |
| S3601A-03 | N-type testing cable | (GORE-OSZKUZKU0240) Female - Male, 60cm |
| S3601A-05 | 20205 N-type calibration kit | DC - 3GHz |
| S3601A-06 | 20204 N-type 75Ω calibration kit | \ |
| S3601A-07 | Economical stable testing cable |
Saluki-N/J.SMA/J.197C-800, N-type to 3.5mm connector, dual male, 80cm |
| S3601A-08 | Economical stable testing cable |
Saluki-N/J.N/K.197C-800, N-type connector, female-male, 80cm |
| S3601A-09 | Economical stable testing cable | Saluki-N/J.N/J.197C-800, N-type connector, dual male, 80cm |
| S3601A-10 | 75Ω testing cable | 24-0800-51M1-51M1 |
| S3601A-11 | 20402 Electronic calibration kit | 300kHz-18GHz, N Type (female to male), 2 port |
| S3601A-12 | 20403 Electronic calibration kit | 10MHz-26.5GHz, 3.5mm (female to male), 2 port |
| S3601A-13 | 20405 Electronic calibration kit | 10MHz-20GHz, 3.5mm (female), 4 port |
| S3601A-16 | Aluminum carrying case | \ |
| S3601A-17 | Front panel jumper | Supports 4-port extension and receiver through test |
| S3601A-18 | 2813A 4-port test equipemt | Need option S3656A-17 |
| S3601A-19 | Cabinet | Easy to build system |
| Option No. | Item | Description |
| S3601B-02 | N-type testing cable | (GORE-OSZKUZKU0240) Male - Male, 60cm |
| S3601B-03 | N-type testing cable | (GORE-OSZKUZKU0240) Female - Male, 60cm |
| S3601B-07 | Economical stable phase testing cable |
Saluki-N/J.SMA/J.197C-800, N-type to 3.5mm connector, dual male, 80cm |
| S3601B-08 | Economical stable phase testing cable |
Saluki-N/J.N/K.197C-800, N-type connector, female-male, 80cm |
| S3601B-09 | Economical stable phase testing cable | Saluki-N/J.N/J.197C-800, N-type connector, dual male, 80cm |
| S3601B-11 | 20402 Electronic calibration kit | 300kHz-18GHz, N Type (female to male), 2 port |
| S3601B-12 | 20403 Electronic calibration kit | 10MHz-26.5GHz, 3.5mm (female to male), 2 port |
| S3601B-13 | 20405 Electronic calibration kit | 10MHz-20GHz, 3.5mm (female), 4 port |
| S3601B-16 | Aluminum carrying case | \ |
| S3601B-18 | 2813A 4-port test equipemt | Need option S3656B-29 |
| S3601B-19 | Cabinet | Easy to build system |
| S3601B-21 | 20201 N-type calibration kit | DC - 9GHz |
| S3601B-22 | 20202 3.5mm calibration kit | DC - 9GHz |
| S3601B-23 | 32111 waveguide calibration kit | 1.72GHz - 2.61GHz |
| S3601B-24 | 32112 waveguide calibration kit | 2.6GHz - 3.95GHz |
| S3601B-25 | 32113 waveguide calibration kit | 3.94GHz - 6.0GHz |
| S3601B-26 | 32114 waveguide calibration kit | 4.64GHz - 7.05GHz |
| S3601B-27 | 32115 waveguide calibration kit | 5.88GHz - 8.17GHz |
| S3601B-28 | 32116 waveguide calibration kit | 7.0GHz - 10.0GHz |
| S3601B-29 | Front panel jumper |
Supports 4-port extension and receiver through test |
Malaysia
