K2 Rapid Test Cassette - WB/S/P

Synthetic Marijuana or K2 is a psychoactive herbal and chemical product that, when consumed, mimics the effects of Marijuana. It is best known by the brand names K2 and Spice, both of which have largely become genericized trademarks used to refer to any synthetic Marijuana product. The studies suggest that synthetic marijuana intoxication is associated with acute psychosis, worsening of previously stable psychotic disorders, and also may have the ability to trigger a chronic (long-term) psychotic disorder among vulnerable individuals such as those with a family history of mental illness. Elevated levels of urinary metabolites are found within hours of exposure and remain detectable for 72 hours after smoking (depending on usage/dosage).

 

【DIRECTIONS FOR USE】

Allow the test, specimen, buffer and/or controls to reach room temperature (15-30°C) prior to testing.

For serum or plasma specimen:

1. Bring the pouch to room temperature (15-30℃) before opening it. Remove the cassette from the sealed pouch and use it within one hour.

2. Place the cassette on a clean and level surface. Hold the dropper vertically and transfer 1 full drop of serum or plasma (approximately 40μL), then add 2 drops of buffer (approximately 80μL) to the specimen well of the cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. See illustration below.

3. Wait for the colored line(s) to appear. Read the result at 5 minutes. Do not interpret the result after 10 minutes.

 

For whole blood specimen:

1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it as soon as possible.

2. Place the cassette on a clean and level surface.

For Venipuncture Whole Blood specimen:

 Hold the dropper vertically and transfer 1 drop of whole blood (approximately 40μL) to the specimen well, then add 2 drops of buffer (approximately 80μL), and start the timer. See illustration below.

For Fingerstick Whole Blood specimen:

 To use a capillary tube: Fill the capillary tube and transfer approximately 40μL of fingerstick whole blood specimen to the specimen area of test cassette, then add2 drops of buffer(approximately 80μL) and start the timer. See illustration below.

3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.

 

 

 

 

 

 

 

Cat. No.	Product Description	Specimen	Format	Kit Size	Cut-Off	Status
DSM-402	K2 Rapid Test Cassette	WB/S/P	Cassette	40 T	100 ng/mL	CE