AN-TDM-IP-STM-1STM1 over IP converter is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
AN-TDM-IP-STM-1 has 2 power slots, 1 STM-1 slot，1 GE uplink slot and 1 External clock interface slot.
STM1 over IP converter AN-TDM-IP-STM-1 can aggregate 63 E1 over IP remote services to 1 STM-1 port. Remote CPEs could be other members in TDM Over IP family such as AN-TDM-IP-16E1, AN-TDM-IP-8E1, AN-TDM-IP-4E1, AN-TDM-IP-E1, AN-TDM-IP-2E1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure.
Features
Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port.
User-friendly Web server supported for easy setup and maintenance.
Support SNMP V1/V2 network management.
STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based、8021.1P based、MAC based and TOS based).
Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning.
Ethernet packet size up to 9720byte.
Point to point and point to multipoint supported.
Local Ethernet port throughput limiting.
Software and hardware online upgrade.
Power supply redundancy.
Specifications
Item
Description
Model
AN-TDM-IP-STM-1
2 PWR slots
1 STM-1 slot
1 Ethernet uplink slot
1 External clock interface
Service card
Ethernet uplink card
5 GE electrical ports and 1 GE optical port
Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x
Speed and duplex auto-negotiation or manual
STM-1 card
2 port
Default SC/PC
Power
Supply
2 power slots
AC 220v power module
AC 110v power module
DC -48v power module
Consumption
≤40W
Working Environment
Temperature
0~ 50°C
Relative Humidity
≤90% (non-condensing)
Dimension
W x H x D (mm):
1U: 440 x 44 x 231 (mm)
Application scenarios:
STM1 Over IP
STM1 Over ETHERNET
Ordering Information
AN-TDM-IP-STM-1
STM-1 over IP (Ethernet) Multiplexer (SDH over IP), Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
Catacomm Corporation Sdn BhdAD-net AN-FM-RS232 Fiber Modem Sole Distributor Malaysia, Tainet T-336Cx Analog Modem Supplier Selangor, Data Communication & IT Networking Supply KL ~ Catacomm Corporation Sdn Bhd
Malaysia
