IP Ethernet & Power Over Coax Adaptor (Extender): Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Catacomm Corporation Sdn Bhd

Penerangan

Description

AN-IP-EOC can transmit the HD IP video and power signal simultaneously via a single coaxial cable. The maximum distance can be up to 250 meters (RG11) and it supports full-duplex 100Mbps. AN-IP-EOC consists of one transmitter side (Close to the remote IP camera) and one receiver side (Close to the local NVR). This device can be widely used in railways, urban transport, security monitoring areas and analog system upgrading projects. It can achieve the seamless transition from analog CCTV to network IP surveillance.

Features

Utilizes traditional coaxial cable
Fully transparent 100BaseT full duplex and adaptive
Supports full-duplex 100Mbps, maximum distance can be up to 250m
Supports SD / HD IP camera and provides PoE power supply
Built-in ESD protection circuitry, can effectively prevent electrostatic damage
The power is input from the receiver side through the coaxial cable using PoC (power on cable) technology to supply power for IP camera and transmitter. Power input and output supports PoE power supply.

Specifications

Coax Terminal	Terminal Type	BNC
	Cable Resistance	75Ω±3Ω
	Interface / Coax Return Loss	＞25dB@1MHz-200MHz
	Data Throughput	200Mbps(100MHz full-duplex)
Network Terminal	Receiver Side (Close to the local NVR)	RJ-45(POE device standard)
	Transmitter Side (Close to the remote IP camera)	RJ-45(POE, PSE compatible)
	Cable Type	CAT5 above
	Transmission Rate	100BaseT/10Base adaptive
Power Input (Close to the local NVR)	RJ45/POE Input	Standard 48DCV ,meet IEEE802.3af requirements
Power Input (Close to the local NVR)	DC Terminal Input	12-24VDC
Power Output (Close to the remote IP camera)	RJ45/POE Output	Depending on cable type and length of the
Power Output (Close to the remote IP camera)	DC Terminal Output	Depending on cable type and length of the
Product Physical Characteristic	Dimensions ( L × W × H )	(Including Terminal Length）112mm×52mm×25mm
	Material	Aluminum
	Net weight	200g
Operating Environment	Working Temperature	-10℃ ～ 60℃
	Humidity	＜85%
	Storage Temperature	-20℃～ 70℃

Coaxial Cable Performance Specifications

Coaxial Cable Type Performance	Coaxial Cable Length (Max)	IP Camera Power
Coaxial Cable Type Performance	Coaxial Cable Length (Max)	48V PoE Via RJ-45	24V DC adaptor
RG6(5.5dB/100m)	180m/580feet	18W	11W
5C-HFBT(4.7dB/100m)	210m/680 feet	18W	11W
RG59(8dB/100m)	125m/400 feet	19W	13W
3C-2V(8dB/100m)	125m/400 feet	19W	14W
RG11(3.3dB/100m)	250m/800 feet	18W	8.7W

Application scenarios

The receiver side (Close to the local NVR) is powered through the PoE switch. The transmitter side (Close to the remote IP camera) does not need additional power. The remote IP camera can choose the AN-IP-EOC PoE terminal for power supply. The IP cameras without POE function must use the separate power supply.

The receiver side (Close to the local NVR) is powered through the PoE power. The transmitter side (Close to the remote IP camera) does not need additional power. The remote IP camera can choose the AN-IP-EOC PoE terminal for power supply. The IP cameras without POE function must use the separate power supply.

The receiver side (Close to the local NVR) is powered through the separate power adaptor. The transmitter side (Close to the remote IP camera) does not need additional power. The remote IP camera can choose the AN-IP-EOC DC terminal for power supply. Please make sure power adaptor voltage match the IP camera voltage. We suggest the IP cameras must use the separate power supply.

Connection diagram and installation instructions:

Connect the video output terminal of IP camera to the POE terminal (RJ-45) of adaptor
If the IP camera does not support POE function, please use an external power adapter
Connect coaxial cable to the coax terminal (BNC) of transmitter.
Connect coaxial cable from the transmitter to the coax terminal (BNC) of receiver.
Connect POE terminal (RJ-45) of receiver to back-end network equipments
If network equipments have no POE power supply function, please use an external power adapter to connect the power terminal of receiver

When two adaptors connect well, the RJ-45 terminal indicators of adaptors will be lit. Yellow light flashes show the data is exchange. When the transmission rate is 10Mbps of connecting one side device, the whole link rate will be 10Mbps and run. And RJ-45 terminal indicators are off.

Lebih maklumat tentang Catacomm Corporation Sdn Bhd