Xest Ling ZXSM-45A is a drilling & tapping machine with double spindle

Xest Ling ZXSM-45A is a drilling & tapping machine with double spindle.

Features

• The machine can tapping directly after drilling without change tools, increase the efficiency
• The machine can drill or tap several holes at same time, not only increase the efficiency, but also ensure different holes distance.
• To obtain different holes distance only need to adjust the distance between the spindles of multi-spindles, not use many jig and reduce the produce cost.
• The machine can work with air-jig, fasten it, and the efficiency is very high, not only save time but also energy.
• The lengthways travel of the table is air  pressure auto feeding, save time but also energy and also improve the efficiency.
• It can process multi-holes, can drill, ream, enlarge and tap the holes of different holes distance diameter and number.
• The scope of the holes distance is very wide to adjusting the multi-spindle head, the No. of spindle is can be changed according to the customer requirement.
• It’s no need to reinstall the workpiece to tapping after drilling , just have to pull table travel, then the workpiece moving to the position of the tapping spindle to tapping.
• The machine can process multi-holes with the multi spindles according to the customers demands or can drill, ream and tap only one hole without multi spindle.

Specifications