SFP module Slot Media Converter: Pilihan Utama di Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Catacomm Corporation Sdn Bhd

Penerangan

Description

AN-UM-SMC series media converters are effective solution, when fiber uplink interface is needed to change frequently, or network re-design is necessary. AN-UM-SMC media converters offer 1 10/100/1000 twisted pair slot and 1 SFP module universal socket.

Using an SFP-based media converter, a switch or router with copper interfaces can be attached to single-mode fiber optic cabling to reach extremely long distances (for example up to 80km for Gigabit Ethernet, as opposed to 100 m for copper or 500 m for multimode fiber).

Features

Compliant with IEEE 802.3 10BASE-T, 802.3u 100BASE-TX, 100BASE-FX Ethernet Standards.
Provide one 10/100BASE-T port or 1 10/100/1000 port (depending on model) with RJ-45 connector;
Provides 1 slot for universal SFP modules, all major SFP brands are supported;
Supporting hot-swap of SFP modules;
Front panel Diagnostic LED Indications;
Can be installed in AN-CH05 chassis – universal type casing
Supports Auto MDI / MDI-X function
Supports Jumbo Frames, MPLS packed size, brand new chipset is used

Specifications

Standard	IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX, 100BASE-FX, 1000Base-Tx, 1000BaseTx
Network Media	10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 m (328 ft) 100BASE-TX: 2-pair UTP Cat. 5, up to 100 m (328 ft) 1000BASE-TX: 2-pair UTP Cat. 5, up to 100 m (328 ft) 9/125μm or 10/125μm single-mode fiber optic cable, up to 120km
Protocol	CSMA/CD
Topology	Star, point to point
Number of Ports	1 x 10/100BASE-TX auto-negotiation, auto-MDIX 1 x SFP slot
Network Data Transfer Rate	10/100/1000Mbps (Full-duplex)
Diagnostic LEDs	Per Unit : Power Per port: Link/Activity, Full-duplex/Collision, Speed (only for TX port)
Connectors	UTP RJ-45, SC/ST Fiber connector
Fiber port	SFP standard slot
Power	External 5V DC 1A
Dimensions (WxDxH)	70.6 x 94.2 x 26mm
Temperature	Operating: 0 ~ 40 C Storage: -10 ~ 70 C
Humidity	Operating: 10% ~ 90% RH Storage: 5% ~ 90% RH
Emission	FCC Class B CE mark Class B VCCI-B

Supported LED indications:

	LED indicator lamp	Status	Explanation
1	FX Link/Act	On	Connection status display for fiber link. “ON” indicates that Fiber link is in correct connection.
1	FX Link/Act	Blink	Active status display of fiber link “Blink” indicates packet goes through Fx end.
2	TX Link/Act	On	Connection status display for electric link. “ON” indicates that electric link is in correct connection.
2	TX Link/Act	Blink	Active status display of fiber link “Blink” indicates packet goes through Tx end.
3	FDX/COL	On	Transceiver works in the full duplex mode.
3	FDX/COL	Off	Transceiver works in the half duplex mode.
4	PWR	On	Power is on and normal.
5	SD	On	Fiber signal is detected.
6	100M	On	Transfer rate of electric interface is 100Mbps.

Ordering Information

AN-UM-AS-SMC	10/100/1000m media converter with one SFP slot ,external power,without SFP module
AN-UM-SMC100	10/100M media converter with one SFP slot ,external power,without SFP module

Additional information

Gigabit 10/100/1000 Autosensing	Any
Fast Ethernet 10/100	Any
SFP slot	1

Lebih maklumat tentang Catacomm Corporation Sdn Bhd