SIMCO – Work Surface Tester ST-4
Brand: SIMCO
Model: ST-4
Description:
| Surface Resistivity | 103 ~ 1013 (Ω/sq. or Ω) |
| Mode |
① Standard Mode (Ohm per square, Surface Resistivity)
② Mat surface – Mat resistance measurement Mode (Ohms, Resistivity to Ground) (w/ cable)
③ IEC Standard measurement Mode follow the IEC standard probe (surface + weight)
|
| LCD Display |
Exponent display (one digit beyond the decimal point) Remaining measurement time by bar-graph indicator Remaining battery life |
| LED Display |
① TEST
Green LED indicator: Standard Mode (Ohm per square, Surface Resistivity)Red LED indicator: Mat-Ground resistance measurement Mode (Ohms, Resistivity to Ground) and IEC standard measurement Mode
② Measurement voltage (10V, 100V)
③CHARGE
Red LED indicator: in process of charging |
| Measurement Time | 10sec, 30sec, 60sec |
| Range | Can be set up the max and min of measurement value (by 0.5 exponent) |
| Accuracy | ±0.5 decade (ex.108.5 ±0.5) |
| Measurement voltage |
Automatically adjust/ chamge
① Cube of 3 to 6: 10V, 10mA MAX
② Cube of 6 to 13: 100V, 1mA MAX
|
| Source | Inside battery |
| External outlet |
① External probe connector
② AC adaptor connector (battery charging USB mini type) |
| Measurement are | 50mm (probe length) x 50mm (probe distance)(in measurement) |
| Probe material | Special conductive rubber (volume resistivity 0.02 Ω.cm max.) |
| Environment | 15 ℃ ~ 25℃, under 60%R.H. |
| Dimension | 114(W) X 78(D) X 69(H) max.(mm) |
| Case | Stainless Steel |
| Weight | Body 700g |
