Metal Forming Oil Drawlub TD 50 - Petrofer

 

Product Description
DRAWLUB TD 50 is a high viscosity, mineral oil containing and water immiscible forming lubricant.  Due to its highly effective lubrication and its chemical activity in the gap between tool and work piece the product is especially suitable for drawing, cutting and press forming operations on difficult steel and aluminium materials. DRAWLUB TD 50 has given excellent performance in screw forming operations resulting in well formed parts even in case of difficult flow structures. DRAWLUB TD 50 contains mineral oils which are considered harmless according to IARC monograph, i.e. they do not have any carcinogenic potential. 

 

Typical Properties

Colour brown visual 

Spec. Gravity/20°C 1.26 g/cm3 DIN 51 757 

Viscosity/20°C approx. 4450 mm2/s DIN 51 562 

Viscosity/40°C 600 mm2/s DIN 51 562 

Flash Point > 220 °C ISO 2 592 

Neutralisation No. 0.5 mg KOH/g DIN 51 558 

Pour Point - 1 °C ISO 3 016 

 

Handling and Storage 

DRAWLUB TD 50 should be treated like mineral oil. No special measures are required concerning handling and storage. As the product contains chlorine it should not be mixed and disposed of with normal waste. 


Available Packing
15 kg pail



Contact our Sales Consultant in area Malaysia (Selangor(Klang, Shah Alam, Subang), Kuala Lumpur(Sungai Buloh), Sepang, Negeri Sembilan, Melaka, Johor(Johor Bharu,Muar,Batu Pahat), Pahang(Temerloh, Kuantan), Kelantan, Terengganu, Perak(Ipoh), Kedah, Perlis, Penang, Sabah, Sarawak), Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei at [email protected].