Penerangan
Castle / VK036
GA2006H VEXO HARM Vibration System
VEXO HARM Vibration Meter (GA2006H) with Vexo HARM Mounting Handle and VIBdataPRO Vibration analysis Software & Cable
This Hand Arm Vibration Meter, the Castle Vexo H, was designed to conduct highly accurate Hand Arm Vibration measurements of your tools and machinery, helping you to comply with The Control of Vibration at Work Regulations (2005).
This is the ideal piece of equipment for Health and Safety Managers to assess vibration exposure in the workplace, giving accurate vibration magnitude measurements of your own tools being used by your own employees.
It's supplied with a simple to attach tri-axial accelerometer with which simultaneous X, Y and Z readings are taken and displayed on the screen in real time. Measurements can be taken in M/S2 or in G, and results are given for Aeq, Peak and Vector Sum. Measured data is also calculated into the HSE's easy to use colour coded points system, and also displays the Exposure Action Value (EAV) and Exposure Limit Value (ELV) times.
Features:
-
Tri-axial vibration meter
-
Fully compliant with ISO 8041 : 2005
-
Large dynamic range
-
Re-chargeable battery pack and charger
-
Large 'Flash' memory
-
Rugged accelerometer and cable
-
Large colour display
-
Only 3 operational buttons for simple use
Taking Vibration Measurements for the Regulations
It's very important to consider that to defend personal injury claims in a court of law, only measure readings are considered to be evidence in your defence.
This best selling Hand Arm Vibration Meter, the Castle Vexo H, enables you to easily measure the vibration levels of the handheld power tools that your employees use, ensuring that your employees aren't over exposed to vibration levels over and above the Action and Limit Values stated in The Control of Vibration at Work Regulations 2005.
Once a measurement has been taken, this Hand Arm Vibration Meter, the Castle Vexo, will display an extremely accurate vibration magnitude level.
This vibration level can be calculated with the exposure time (actual exposure times can be found with a tool timer) into HSE Exposure Points - the HSE's guideline method of monitoring vibration exposure in the workplace. More information can be found on HSE Exposure Points - click here.
This Hand Arm Vibration Meter was designed to be nothing but easy to use, giving you the ability to measure large numbers of different hand held power tools in a day, whilst ensuring highly accurate results. Recorded Data is logged in the internal memory of the instrument, ready to be downloaded to the included free software, VibDATA Vibration Analysis Software. Data can also be viewed on screen for immediate use.
Built and supplied with long life rechargeable batteries, an additional pack can be purchased to ensure this Hand Arm Vibration Meter can be ready to use whenever you need it. Designed with a rugged and impact resistant body, you can be confident that your new investment will stand the test of time.
This Vexo H Hand Arm Vibration Meter and all it's accessories is supplied in an Attache Carry Case.
Start effectively measuring vibration exposure with the Castle Vexo H Hand Arm Vibration Meter to ensure HAVS doesn't become a problem with in workforce.
Technical Specification
|
Instrument Standards |
ISO 8041 : 2005 Human Response to Vibration |
|
For compliance with: |
|
ISO 5349 : 2001 Measurement and evaluation of human exposure to hand-transmitted vibration |
Range (Integration = Acceleration)
|
Low: 0.05 - 200.0m/s-2 / 0.005 - 20.4g |
|
High: 0.50 - 2000.0m/s-2 / 0.05 - 204.0g |
|
Measurement Channels |
One |
|
Parameters |
Acceleration: Arms, Aeq, Amax, Peak, Vector Sum, HSE Exposure Points, EAV and ELV |
|
Linear Operating Range |
72dB |
|
Frequency Weighting |
WH - Hand Arm Filter |
|
Memory |
Flash memory storing up to 992 recordings |
|
Transducer |
Castle KD1010, 10mV/g |
|
Noise Floor |
<0.002 m/s-2 - Low Range |
|
<0.020 m/s-2 - High Range |
|
Display |
Full Colour Graphic OLED Display (160 x 128) |
Batteries
|
NiMH re-chargeable cell pack |
|
Typically 10 hours continuous use |
Connections
|
Input: 3.5mm Stereo Jack Socket |
|
AC Output: 4 Pole 3.5mm Jack Socket |
|
Download: USB Micro B (Cable Supplied) |
|
Recharge: DC Socket (Charger & Cable Supplied) |
|
Languages |
English UK, English US, Chinese, French, German, Italian, Portuguese Brazilian, Russian, Spanish |
|
Temperature Operating Range |
-10 to + 50ºC |
|
Humidity |
Up to 90% RH Non Condensing |
Electromagnetic Compatibility
|
Designed in accordance with the following Electromagnetic Compatibility Directives: |
|
SI 2005/281 |
|
2004/108/EC |
|
Case |
High Impact ABS plastic with tactile membrane keypad |
Lebih maklumat tentang Inter Products Marketing Sdn Bhd
