1 Port HD AHD/TVI/CVI 1080p Video Balun, BNC & Push-Pin Terminal Type | Cable Type

Description

Features

• No need to provide power with push-pin terminals
• Transmit HDTVI signal up to 200m, HDCVI signal up to 300m,AHD signal up to 300m
• Support 720P (25 / 30FPS) and 1080P (25 / 30FPS)
• Built-in transient protection

Specifications

Installation

 

	Step	Installation Instruction
	1	Connect the video signal to BNC terminal of Transmitter (1).
	2	Connect UTP cable to the negative pole (2) of Transmitter.
	3	Connect UTP cable to the positive pole (3) of Transmitter.
	4	Connect UTP cable to the positive pole (4) of Receiver.
	5	Connect UTP cable to the negative pole (5) of Receiver.
	6	Connect the video signal of Receiver to display device (6).

1. Recommend to choose the standard cables to achieve the excellent image effect.
2. Single wire diameter should be above 0.5 mm.
3. Resistance of single wire with 100 meters shouldn’t exceed 10Ω.
4. Cable twist density should reach Cat5 standard.
5. Cable flame resistance and flexibility should reach national standard.
6. Suggest you use waterproof type cable to ensure the image effect and long time use in the outdoor environment.
7. For general project application, recommend to use the three pairs of one UTP cable to transmit three signals, letting the remaining one pair lines reserve or for grounding operation.

1. Twisted-pair cable can’t be connected with strong voltage cables together and when connected to the strong current equipment, keep the distance.
2. Cable connection can adopt connector, welding, twist ground, and should ensure that the connection is firm and waterproof.
3. The cable length form camera to transmitter should be as short as possible, permitted within 20 meters.

1. Please offer good waterproof since there is no waterproof design for product.
2. There is no difference for transmitter and receiver. They can be used reversely.
3. If devices fail, please do not disassemble or repair by yourself, please contact us timely.

Ordering Information