INTEGREX e-500H: Pilihan Utama di Penang, Malaysia, Johor Bahru (JB), Bayan Lepas, Iskandar Puteri MACHINE TERMINAL (PG) SDN BHD

Penerangan

Mazak Integrex e-500H

DONE IN ONE processing of large workpieces

Large swing and Y-axis stroke for large workpieces.
Powerful turning and milling spindles plus rigid machine construction provide unsurpassed productivity.
Wide variety of optional equipment available for enhanced versatility.

Machine Specifications

Mazak Integrex e-500H		Bed Length - 1500U in	Bed Length - 3000U in
Capacity	Maximum Swing	820 mm / 32.28 in	820 mm / 32.28 in
	Maximum Machining Diameter	820 mm / 32.280 in	820 mm / 32.280 in
	Maximum Machining Length	1524 mm / 60.000 in	3048 mm / 120.000 in
Main Spindle	Chuck Size	15 in	15 in
	Maximum Speed	3300 rpm	3300 rpm
	Motor Output (30 minute rating)	30 kw / 40.0 hp	30 kw / 40.0 hp
Milling Spindle	B-Axis Travel	240°	240°
	Magazine Capacity	40	40
	Maximum Speed	10000 rpm	10000 rpm
	Motor Output (15 minute rating)	37 kw / 50.0 hp	37 kw / 50.0 hp
Feed Axes	Travel (X Axis)	870 mm / 34.25 in	870 mm / 34.25 in
	Travel (Y Axis)	500 mm / 19.68 in	500 mm / 19.68 in
	Travel (Z Axis)	1598 mm / 62.91 in	3122 mm / 112.87 in

Integrex e-H Technology

Control Type: SmoothX

Intelligent Machine Functions

Active Vibration Control

Minimised vibration function for high-speed, high-accuracy machining and longer tool life.

Smooth Corner Control

Smooth cornering to reduce unnecessary acceleration/deceleration for improved finished surfaces and minimised cycle times.

Smooth Machining Configuration

(Convenient Parameter Setting and Fine Tuning Function) Machining time, finished surface smoothness and machining shape can be adjusted for improved productivity.

Intelligent Safety Shield

(Machine Interference Prevention) Functions for safe operation during machine setup and automatic operation.

Intelligent Thermal Shield

(Heat Displacement Control) Unique Mazak heat displacement compensation system.

Mazak Voice Adviser

(Verbal Message System) Verbal support for machine setup and safe conditions confirmation.

Intelligent Maza-check

(High-Accuracy 5-Axis Calibration) Position misalignment and incline of the rotary axes can automatically be measured and compensated to realize high-accuracy 5-axis machining.

Intelligent Maintenance Support

(Comprehensive Maintenance Monitor) Useful information for improved preventative maintenance to prevent unexpected machine downtime.

Intelligent Performance Spindle

(Comprehensive Spindle Monitoring) Monitoring milling spindle status - designed to minimize downtime and improve preventative maintenance.

Variable Acceleration Control

New function which permits the faster acceleration capability of linear axes to be used whenever possible. The slower acceleration of the rotary axes is not used for all program commands,resulting in faster machining cycle times.

Series Characteristics

DONE IN ONE performance
Y-Axis, off-center machining
240-degree B-Axis milling spindle positioning
Single-setup machining
Second turning spindles
Lower turret rotary tool spindles
Large capacity tool magazine

Lebih maklumat tentang MACHINE TERMINAL (PG) SDN BHD