AGC-100 is a single channel controller compatible with the FRG 7xx, PVG-5xx, PCG-75x and CDG-500 series of active gauges and automatically identifies the active gauge connected.

AGD-100 is a low cost single channel display option for the FRG-700/702, PVG-5xx and PCG-75x series of active gauges.

Both units have user selectable measurement unit (mbar, Torr, Pascal), and adjustable setpoint control.


Active Gauge Selection Chart

Product Details

Part Number	Description
AGC100	AGC-100 active gauge control unit, for FRG 7xx, PVG-5xx, PCG-75x and CDG-500 Series
AGC100ADPT	AGC-100, front adapter, rack adaptor
AGD100	AGD-100 active gauge display, for FRG-700/702 and PVG-5xx and PCG-75x series
X3001-60100	Digital Rough Gauge Cont, Torr, Nist
R3084301	PCB assembly, dual convection gauge, XGS-600 gauge controller
R3075301	PCB assembly, hot filament ionization gauge, XGS-600 gauge controller
R3080301	PCB assembly, inverted magnetron ion gauge, XGS-600 gauge controller
L6426301	Rack Mount Kit, XGS-600, Dual
L6422301	Rack Mount Kit, XGS-600, Off-Center, 19 in.
L6423301	Rack Mount Kit, XGS-600, On-Center, 19 in.
X3203-60012	TC, Convectorr, 2.75In, P-Type, Laser
R3124301	Tilt stand accessory, XGS-600 gauge controller

Features

• Simplified setup with automatic identification of Agilent active gauges
• Universal compatibility with user-selectable pressure units (mbar, Torr, Pascal)
• Utilize pressure readings to perform critical operations

Ordering Details

Description	Part Number
Active Gauge Controller for FRG 7xx, PVG-5xx, PCG-75x and CDG-500 Series	AGC100
Gauge display for FRG-700/702 and PVG-5xx and PCG-75x Series	AGD100
Accessories
Front adapter for controller, rack adaptor, 3u	AGC100ADPT
Cable (FRG700/702, PVG, PCG) 3 m / 9.9 ft	AGCCBL103
Cable (FRG700/702, PVG, PCG) 5 m / 16.4 ft	AGCCBL105
Cable (FRG700/702, PVG, PCG) 10 m / 33 ft	AGCCBL110
Cable (FRG720/730) 3 m / 9.9 ft	AGCCBL203
Cable (FRG720/730) 5 m / 16.4 ft	AGCCBL205
Cable (FRG720/730) 10 m / 33 ft	AGCCBL210
Cable (CDG500) 3 m / 9.9 ft	AGCCBL303
Cable (CDG500) 5 m / 16.4 ft	AGCCBL305
Cable (CDG500) 10 m / 33 ft	AGCCBL310

 

Specifications

Technical Specifications

Measurement channels	One (1)
Measurement range	2 x 10-10 to 1500 mbar (1.5 x 10-10 to 1125 Torr)
Measurement unit (selectable)	Mbar, Torr, Pascal
Rate A/D Converter	10/sec 16 bit
Setpoints Setpoint relays Channel assignment Relay contact Hysterisis Contact rating Connector	One (1) One (1) Potential free change over contact Adjustable 30 VAC/1A; 60 VDC/0.5A D-Sub, 9 pin, male
Display	LED
Analog output Range Connector	0-10.3 V, sensor analog output signal D-Sub, 9 pin, male
Supply	90-250 V, 50/60 Hz
Consumption	< 30W
Operation Temperature (ambient)	5 to 50 °C
Digital Interface (AGC-100 only)	RS-232C ; D-Sub, 9 pin, female

 

Outline Drawing