About TAKISAWA LS-1000/1000M
| ITEMS | UNIT | LS-1000 | LS-1000M | ||||
| L10/L15/L20/L30 | L10/L15/L20/L30 | ||||||
| CAPACITY | Maximum Swing | mm | 1,020 | 1,020 | |||
| Swing Over Saddle | mm | 780 | 780 | ||||
| Standard Turning Diameter | mm | 320 | 330 | ||||
| Max Turning Diameter | mm | 900 | 850 | ||||
| Max Turning Length | mm | 1,031/1,531/2,131/3,131 | 970/1,470/1970/2970 | ||||
| Max Bar Work Capacity | mm | 180 | 180 | ||||
| TRAVEL | X-Axis Travel | mm | 500 | 500 | |||
| Z-Axis Travel | mm | 1,100/1,600/2,100/3,100 | 1,100/1,600/2,100/3,100 | ||||
| SPINDLE | Spindle Speed | 1,200 (1,000) | 1,200 (1,000) | ||||
| Chuck Size | 20” (24”) | 20” (24”) | |||||
| Spindle Nose | A2-15 | A2-15 | |||||
| Through Hole Dia | mm | 200 | 200 | ||||
| Bearing Diameter | mm | 266 | 266 | ||||
| TURRET | Number Of Tool Stations | T10 | T12 | ||||
| Shank Height For Square Tool | mm | 32 | 32 | ||||
| Shank Dia For Boring Bar | mm | 65 (75) | 63 | ||||
| TAILSTOCK | Tailstock Travel | mm | 1,000/1,500/2,000/3,000 | 1,000/1,500/2,000/3,000 | |||
| Tailstock Spindle Dia | mm | 180 | 180 | ||||
| Taper Hole Of Tailstock Spindle | MT.6 | MT.6 | |||||
| Tailstock Spindle Travel | mm | 150 | 150 | ||||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 12 | 12 | |||
| Z-Axis Rapid Traverse Rate | m / min | 16 / 16 / 16 / 12 | 16 / 16 / 16 / 12 | ||||
| MOTOR | Spindle Drive Motor | kw | 30/37 (37/45) | 30/37 (37/45) | |||
| Turret Index Motor | kw | 1.2 | 1.2 | ||||
| Milling Motor | Kw | 7.5 / 11 | |||||
| X-Axis Drive Motor | kw | 4 | 4 | ||||
| Z-Axis Drive Motor | kw | 6 | 6 | ||||
| SIZE | Height | mm | 2,590 | 2,590 | |||
| Width | mm | 5,062/5,562/6,062/7,062 | 5,062/5,562/6,062/7,062 | ||||
| Depth | mm | 2,180 | 2,180 | ||||
| Weight | kg | 12,000/13,500/16,500/18,000 | 12,000/13,500/16,500/18,000 | ||||
| •Specification is subject to change without further notice. | |||||||
Malaysia
