TurbiTechw2 D-ISO Sensor

TurbiTechw2 D-ISO Sensor

Kategori: Stok Habis
Untuk maklumat lanjut, lawati laman web rasmi kami di lelab.com.my

Penerangan

General Specification

Physical
Dimensions 300 x 185 x 128 mm (HxWxD)
Weight 3.9 kg (inc 5 m of cable)
Protection Class IP65
Cable Entries Integral cable gland
Wetted Parts Black acetal, Polypropylene, Nylon, chrome plated brass, Spectrosil 2000, nitrile
Process Connections Inlet and drain: ½'' BSP with 12 mm hosetail
Outlet: ¼'' BSP with 5 mm hosetail
Cable Type 4 core, 2 twisted pair 5 mm outside diameter, polyurethane coated
Cable Length 5 metres as standard, other lengths can be supplied on request
Service Requirement Wiper replacement annually as required (application dependent)
Environmental Data  
Operating Temperature 0 to 50ºC
Interface to Monitor  
Power Supply 12VDC from Monitor
Sensor Output ModTech - RS485

 

Measurement  
Low Range 0-30 NTU
Accuracy ± 2% of reading or 0.02 NTU whichever is greater
Limit of Detection 0.02 NTU
Minimum Operating Range 0-3 NTU
   
High Range 0-200 NTU
Accuracy ± 2% of measured value or ±0.1 NTU whichever is greater
Limit of Detection 0.5 NTU
Minimum Operating Range 0-20 NTU
   
Measurement Principle 90º Light Scatter, ISO 7027 Compliant
Pressure Rating (Max) 2 bar
Flow Rate 0.5 L/min to 3 L/min
Units NTU, FTU, FNU
  It has been assumed that 1 NTU = 1 FTU = 1 FNU for purposes of this document
Mounting  
Installation Type Wall or surface

 

 

Lebih maklumat tentang LELab Sdn Bhd
LELab Sdn Bhd
LELab Sdn Bhd Laboratory Equipment Malaysia, Titrator & Sonicator Cleaning Bath | LELab Sdn Bhd