Kyoritsu KEW2009R AC/DC Digital Clamp Meter

Kyoritsu KEW2009R AC/DC Digital Clamp Meter

Kategori: Electrical Tersedia
Untuk maklumat lanjut, lawati laman web rasmi kami di enari.com.my

Penerangan

• CAT IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
• Accurate True-RMS reading of AC current or voltage with distorted waveform.
• Can measure AC and DC currents up to 2000A.
• Output terminal for connection to recorders.
AC A 400.0/2000A
±1.3%rdg±3dgt (0 - 400.0A, 150 - 1700A) (45 - 66Hz)
±2.0%rdg±5dgt (0 - 400.0A, 150 - 1700A) (20Hz - 1kHz)
±2.3%rdg±3dgt (1701 - 2000A) (45 - 66Hz)
DC A 400.0/2000A±1.3%rdg±2dgt
AC V 40.00/400.0/750V
±1.0%rdg±3dgt (45 - 66Hz)
±1.5%rdg±5dgt (20Hz - 1kHz)
DC V 40.00/400.0/1000V±1.0%rdg±2dgt
Ω 400.0/4000Ω ±1.5%rdg±2dgt
(Electronic protection (no fuse) up to 600V)
Continuity buzzer Buzzer sounds below 20Ω
Hz 10.0 - 4000Hz±1.5%rdg±5dgt
(Input sensitivityCurrent: more than 40AVoltage: more than 10V)
Conductor size Ø55mm max.
Output Recorder :
DC400mV against AC/DC400.0A
DC200mV against AC/DC2000A
Applicable standards IEC 61010-1 CAT IV 600V, CAT III 1000V Pollution degree 2
IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1
Power source R6 (1.5V) × 2
Dimensions 250(L) × 105(W) × 49(D)mm
Weight Approx. 540g (including batteries)
Included Accessories 7107A (Test leads), 9094 (Carrying case)
R6 (AA) (1.5V) × 2, Instruction Manual
Optional Accessories 7256 (Output cord)

Lebih maklumat tentang Enari Instruments And Controls
Enari Instruments And Controls
Enari Instruments And Controls Thermometer Supplier Malaysia, Measuring Equipment Supply Selangor, Air Flow Sensor Supplies Kuala Lumpur (KL) ~ Enari Instruments And Controls