Transducer
TSURUGA MODEL 7574
TSURUGA MODEL 7574

 

TSURUGA MODEL 7574

TECH IMPRO AUTOMATION SOLUTION SDN BHD flag
Kategori: Transducer Tersedia
Untuk maklumat lanjut, lawati laman web rasmi kami di improtechonline.com
Lawati Laman Web Rasmi Hubungi kami
Penerangan

DC/ Pulse Transducer

Isolated DC / Pulse Signal Transducer

Model Designation

7574 - □ - □ - □
    ①   ②   ③
① Input Signal
Code Input Signal
01 DC 0 to 10 mV
02 DC 0 to 100 mV
03 DC 0 to 1 V
04 DC 0 to 5 V
05 DC 0 to 10 V
09 DC 1 to 5 V
00 Except above DC voltage input (10 mV to 200 V)
23 DC 0 to 1 mA
29 DC 4 to 20 mA
20 Except above DC current input (100 µA to 20 mA)
② Output Signal
Code Output Signal
1 High-speed voltage pulse
2 High-speed open collector
3 Low-speed voltage pulse
4 Low-speed open collector
5 Low-speed relay contact
*
Designate the frequency when ordering.
③ Power Supply Voltage
Code Power Supply Voltage
3 AC 100/110 V
5 AC 200/220 V
9 DC 24 V

Input Specifications

Input Signal Input Impedance
DC 0 to 10 mV More than 1 MΩ
DC 0 to 100 mV
DC 0 to 1 V
DC 0 to 5 V
DC 0 to 10 V
DC 1 to 5 V More than 1 MΩ
DC 0 to 1 mA Approx. 100 Ω
DC 4 to 20 mA Approx. 5 Ω

Output Specifications

High-speed voltage pulse (L pulse)
Output signal voltage DC 5 V　(TTL level　Fo = 5)
Pulse width Approx. 30µs
Output frequency 0 to 10 kHz
High-speed open collector(ON pulse)
Rated output DC 30 V, 50 mA
Pulse width Approx. 30µs
Output frequency 0 to 10 kHz
Low-speed voltage pulse(L pulse)
Output signal voltage DC 5 V　(TTL level　Fo = 5)
Pulse width Approx. 30ms
Output frequency 0 to 130 pulse/min
Low-speed open collector(ON pulse)
Rated output DC 30 V, 50 mA
Pulse width Approx. 30 ms
Output frequency 0 to 130 pulse/min
Low-speed relay contact
Contact rating AC 250 V, 0.5 A(load resistance)
DC 30 V, 0.5 A(load resistance)
Relay life Mechanical: more than 50 million times
Electrical: more than 1 million times
Operating time Approx. 30ms
Output frequency 0 to 130 pulse/min

General Specifications

Allowance 0.2% of SPAN at 23°C
Response Less than (20ms + 1 cycle)
Temperature coefficient 200 ppm/°C
Output adjustment range ZERO：More than ±3% of SPAN
SPAN：50 to 100% of set range
Output cut off 0 to 10% variable
Insulation resistance Between input terminals and output terminals: DC 500 V　More than 100 MΩ
Withstand voltage
Between input terminals and power supply terminals
AC 1500 V 1min. (During DC Power: AC 1000 V 1min.)
Between input terminals and output terminals
AC 1500 V 1min. (During DC Power: AC 1000 V 1min.)
Between all terminals and external case AC 1500 V 1min.
Power supply voltage
AC 100/110 V ±10%　50/60 Hz : Less than 3 VA
AC 200/220 V ±10%  50/60 Hz : Less than 3 VA
DC 24 V ±10% : Less than 70 mA
Operating temperature -5 to 55°C
Storage temperature -20 to 70°C
Weight Approx. 400 g(AC) / Approx. 250 g(DC), Socket: Approx. 70 g

Lebih maklumat tentang TECH IMPRO AUTOMATION SOLUTION SDN BHD
TECH IMPRO AUTOMATION SOLUTION SDN BHD
TECH IMPRO AUTOMATION SOLUTION SDN BHD Industrial Automation Supplier Malaysia, Flow Meter Supply Penang, Pressure Transmitter Supplies Butterworth ~ TECH IMPRO AUTOMATION SOLUTION SDN BHD
Hubungi kami flagMalaysia