REM: Pilihan Utama di Penang, Malaysia, Simpang Ampat iMS Motionet Sdn Bhd

Penerangan

Product outline

Convert real-time angle & rotation speed from rotary encoder of torque meter into output voltage.

You can use multi-channel oscilloscope to monitor
torque vs angle, torque vs rotation speed
in real-time.

It is also suitable for feedback control using voltage ouput.

●Angle & rotation speed from rotary encoder can be monitored simultaneously at voltage -10～+10V.

●You can decide starting point using Z phase signal (UTM Ⅱ only) or external pulse signal

Angle output

位置の出力

Output of rotation speed (3) (4)

回転速度の出力
*3. Able to measure from 1rpm onwards.
*4 .If there is no pulse input after 0.1 seconds, output will return to starting point (0V).

Specifications

Angle signal	－10 to +10V
Rotation speed signal	－10 to +10V
Resolution of voltage output	Approx. 1/50000 against ±10V
Non-linearity of voltage output	0.01%/FS
Responsitivity of voltage output	DC to 5kHz/－3dB
Compensated temperature range	－10 to +50℃
Temperature effect on span	0.005%FS/℃
Humidity	85%RH or less (non-condensing)
Power supply voltage	DC24V±15％
Consumption current	0.04A or less
Dimensions	28(W)×78(H)×80(D) mm(Projections excluded)
Weight	Approx.120g

Attachments
Operation manual	1

Accessories

Model
CATM(R)21-M	Cable for connection UTM Ⅱ rotary encoder 2m
CATM(R)51-M	Cable for connection UTM Ⅱ rotary encoder 5m
CATM(R)321-MR	Cable for connection UTM Ⅲ rotary encoder 5m
CATM(R)351-MR	Cable for connection UTM Ⅲ rotary encoder 5m
CN91	Waterproof plasctic connector for UTMⅡ rotary encoder

External dimention

Download

Product catalogue(PDF)		REM catalogue(557 KB)

Lebih maklumat tentang iMS Motionet Sdn Bhd

REM