Part can be used for Audi A3, A4 B8, A5, A6 C7, Q3, Q5, TT, Volkswagen Beetle, Golf V/ VI, Jetta III/ IV, Passat B6/ B7, Passat CC B6, CC, Scirocco III, Sharan and Tiguan with Engine 1.8/ 2.0 TSI/ TFSI.
No additional sealant should be applied during installation. Otherwise, it will forms a bead on the inner section of the casting, this is removed with coolant flow and becomes wrapped around the rotating pump shaft between the housing and the impeller. Eventually will causes the component failure.
An improper or excessive use of sealant often leads to premature leakage. Thus, for example, excess sealant which has penetrated into the cooling area portion detached and deposited in the mechanical seal. On the other hand, it may come at the assembly area (engine) to a leakage due to an uneven applied sealant compound.
Never start the engine without coolant! The dry running destroy the mechanical seal.
Kindly drop us a message by providing your vehicle chassis number to avoid incompatible part.
Soon Heng Motor Supply Co.Mercedes Spare Parts Selangor, Auto Parts Supply Kuala Lumpur (KL), Car Brake System Supplies Malaysia, Klang ~ Soon Heng Motor Supply Co.
Malaysia
