PROSTAT - PRS-812B Resistance Meter: Pilihan Utama di Melaka, Malaysia, Ayer Keroh Carlssoon Technologies (Malaysia) Sdn Bhd

Penerangan

PROSTAT - PRS-812B Resistance Meter
Brand: Prostat
Model: PRS-812B

PORTABLE, PRECISION RESISTANCE MEASUREMENT FROM 0.10 TO 1.00 X 10¹² OHMS.

Product Features:

Wide Range Resistance: 0.10 Ω to 1.00x10¹² Ω
Accuracy of ±2% from 1.00 Ω to 9.99x10¹⁰Ω
Constant Test voltages 10V and 100V for specification measurements to meet international and domestic ESD measurement standards
Auto Resistance Range Control
Auto Test Voltage Control
Uses a Rechargeable Li-ion Battery Pack
Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)
120 Data Set Internal Memory
Uses Standard USB Cable for Charging
Charges in 2 Hours
2-year Limited Warranty on Main Instrument

Product Overview:

The ideal choice for the ESD Auditor
The PRS-812B Resistance Meter delivers the full-featured functionality and advanced measurement capabilities that ESD Auditors need. It puts a lot of testing power in your hands to quickly and efficiently measure resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of floors, worksurfaces, carts, garments, packaging, planar material in accordance with all of the ESD Association documents for resistance measurements, such as ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1 and ANSI/ESD STM97.1.
Fully automatic for peace of mind
The PRS-812B uses 3 modes of measurements: Automatic, Manual and Auto-Manual. When measuring in Automatic mode, the resistance range and test voltage is automatically selected for you. Auto mode gives you peace of mind and saves you time.
A very accurate resistance meter
The PRS-812B’s wide range meter offers fast, accurate resistance testing using the included high quality 10 foot test leads. The low resistance range is designed to measure from 0.10 to 1.0x10⁴ Ω.
The PRS-812B also meets ANSI/ESD S20.20 and TR53 procedure requirements from 1.00x10³ to 1.00x10¹¹ Ω. Measurement guidelines require accurate measurements one decade above the resistance requirements of a facility’s ESD program.
Under load test voltages
Uses constant voltage under load for 10 volts and 100 volts with an accuracy of ± .05%, meeting the requirements of ANSI/ESD S20.20 resistance testing for product qualification and compliance verification. The low resistance range uses variable voltage from 0.1 mv to 9.99 V.
Long lasting battery
The PRS-812B uses a 3 cell Li-ion battery pack that will last typically 480 hours, taking more than 8,000 measurements before you will need to charge it. Charging is accomplish without removing the battery pack, using the included USB cable and wall charger. The Micro USB cable allows you to charge the PRS-812B via the USB port of your computer. Also included is a wall charger with interchangeable AC blades for global use that includes North America, Europe, United Kingdom, Australia, and China.
Other useful capabilities:
• Displays resistance measurements in either scientific or ohmic format
• Includes USB cable and charger for fast charging through computer or wall outlet
• Approximately 8,000 measurements on a single charge
• Internal memory for storing and recalling up to 120 data sets
• Li-Ion battery pack fully tested and complies with UN38.3
• Easy-access door for fast battery changes without breaking the calibration seal
• Battery status indicator on the display
• Charges while being used, without removing the battery
The 801B-012 battery packs have been tested and were found to comply with the criteria of “UN Model Regulations, Manual of Test and Criteria, ST/SG/AC.10/11/Rev.7 Part III, subsection 38.3”, also known as “UN38.3”. As a result they can be shipped unrestricted internationally by any means.

Technical Specification:

General Specifications

Characteristics
Measuring Range	0.10 Ω to 1.00 x 10¹² Ω
Measurement Modes	Auto, Manual, Auto-Manual
Display	6.9 cm x 4.8 cm (2.7” x 1.9'') 6 digit - 7 segment color HTN display
Battery Power	Re-chargeable Li-Ion battery (included). Battery swappable through easily accessible battery door at the rear of the instrument
Battery Charging	Rechargeable via USB 2.0 through PC port or Wall Charger (included)
Battery Charge Indicator	Battery has a status indicator on instrument screen
Battery Charging Time	2 hours
Battery Life	480 hours typical 50 hours (of continuous use) Approximately 8,000 measurements
Memory Capacity	120 data sets
Memory Data Sets	Data sets include resistance.
Data Download	N/A
USB	USB 2.0 A to Micro-B
Operating Temperature	10°C to 30°C (50°F to 80°F)
Operating Relative Humidity	0% – 85%, non-condensing
Operating Altitude	2000 m
Storage Temperature	-30°C to +60°C (-22 °F to +140 °F)
Dimensions (WxHxD)	117 mm x 188.5 mm x 48 mm 4.59 in x 7.42 in x 1.90 in
Weight	500 g (1.10 lb)
Case Material	Polycarbonate with Rubber Side Grips
Color	Grey
Warranty	2 Year Limited Warranty¹

¹ Warranty on the battery pack limited to a defective battery pack and excludes normal end of life of the battery. The warranty does not cover defects that are caused by normal wear and tear, inadequate maintenance, insufficient ventilation, transportation, storage or faulty repair, misuse, neglect, accident or abuse, modification to the battery pack.

Resistance Measurement Specifications

Measuring Range	Resolution	Accuracy¹
0.10 Ω to 1.00 Ω	0.01E-2 to 1.00E-2	±5%²
1.01 Ω to 9.99 x 10¹⁰	1.01E0 to 9.99E10	±2%
1.00 x 10¹¹ to 9.99 x 10¹¹	1.00E¹¹ to 9.99E¹¹	±5%
1.00 x 10¹²	1.00E¹²	±20%

¹at 23°C (73.5°F) and 30% RH
² Corrected for test lead resistance

Test Voltage Accuracy

Test Voltage	Units	Resistance Range	Accuracy¹
.0001 – 9.99	V	1E-2Ω to <1E4Ω	±0.5%
10	V	1E4Ω to <1E6Ω	±0.5%
100	V	1E6Ω to ∞	±0.5%

¹ at 23°C (73.5°F) and 30% RH

LED Indicators

Resistance Measurement (Ω)		Illuminated Decade LED
Min	Max	Illuminated Decade LED
0	9.99E1	<2
1.00E2	9.99E2	2
1.00E3	9.99E3	3
1.00E4	9.99E4	4
1.00E5	9.99E5	5
1.00E6	9.99E6	6
1.00E7	9.99E7	7
1.00E8	9.99E8	8
1.00E9	9.99E9	9
1.00E10	9.99E10	10
1.00E11	9.99E11	11
1.00E12		12

Measurement Modes

Mode	Resistance Range	Test Voltage
Automatic	Automatic	Automatic	@<10V: 0.01 to <1.00E+04 Ω @ 10V: 1.00E+04 to <1.00E+06 Ω @100V: 1.00E+06 to 1.00E+12 Ω
Manual	Manual	Manual or Automatic	@<10V: 0.01 to <1.00E+05 Ω @ 10V: 1.00E+03 to <1.00E+09 Ω @100V: 2.00E+05 to 1.00E+12 Ω
Auto-Manual	Manual Start Automatic Run	Automatic	@<10V: 0.01 to <1.00E+04 Ω @ 10V: 1.00E+04 to <1.00E+06 Ω @100V: 1.00E+06 to 1.00E+12 Ω

Electrification Period

Resistance Range	Measurement Period	Minimum Electrification Period
.1.00E-2 Ω to <1.00E6 Ω	2 seconds	3 seconds
1.00E6 Ω to <1.00E12 Ω	2 seconds	8 seconds
1.00E12 Ω	Variable	15 seconds

801B-012 Li-Ion Battery Pack

General Specifications
Battery Type	3-cell, Rechargeable
Technology	Lithium-Ion Technology
Nominal Capacity	2400mAh
Output Voltage	3.7V
Performance Amp-Hour	2.4Ah
Performance Watt-Hour	8.88Wh
Transport Safety Certified	UN38.3
IATA UN Number	UN3480
IATA Class (Sub Hazard)	9
Operating Temperature	Discharging: -20°C to 60°C (-4°F to 140°F) Charging: 0°C to 45°C (32°F to 113 °F)
Storage Temperature	-5°C to 35°C (-23°F to 95°F)
Storage Humidity	≤75% Rh
Battery Pack Dimensions (WxHxD)	53mm x 48.5mm x 15mm 2.0” x 1.9” x 0.6”
Weight	65g (2.2 oz)

Packing Instructions (P.I.)¹

When battery is packaged separately (e.g. a replacement battery pack):	IATA P.I. 965 Section IB applies
When battery is packaged with the resistance meter, not contained in it:	IATA P.I. 966 Section II applies
When battery is contained within the resistance meter, then packaged:	IATA P.I. 967 Section II applies

¹Per IATA 2021 regulations. Regulations subject to change without notice.
The 801B-012 battery packs have been tested and were found to comply with the criteria of “UN Model Regulations, Manual of Test and Criteria, ST/SG/AC.10/11/Rev.7 Part III, subsection 38.3”, also known as “UN38.3”. As a result they can be shipped unrestricted internationally by any means.
Ensure that any shipment packaging that contains these batteries is properly marked on the outside of the package for containing Li-ion batteries, using the label as described in the ‘Additional Requirements Section’ of Packing Instructions 965...970. Minimum size of the label is 120 x 110 mm (4.75 x 4.33 inches).

What’s Included in this Package:

PRS-812B Resistance Meter
801B-012 Li-ion Bbattery Pack
800LB 10 foot Silicone Test Lead - Black
800LR 10 foot Silicone Test Lead - Red
800S Test Lead Shunt
PTB-915 Audit Test Bed
800B-001 AC/DC Power Supply
800B-002 Micro USB Cable
RS-801BC Bulldog Clip
PSI-870MAC Metal Clip (2)

Lebih maklumat tentang Carlssoon Technologies (Malaysia) Sdn Bhd