UCD-IPH00-XXXXX-05M0-2TW

UCD-IPH00-XXXXX-05M0-2TW

Kategori: Encorder & Linear Sensor Tersedia
Untuk maklumat lanjut, lawati laman web rasmi kami di etechinstruments.com

Penerangan

Interface  
Interface Programmable Incremental
Programming Functions PPR (1-16384), Output, Counting Direction
Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)
Outputs  
Output Driver Push-Pull (HTL)
Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage
> V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL) < 0.5 V
Output Voltage High Level RS422 (TTL) > 4 V
Output Voltage Low Level RS422 (TTL) < 0.5 V
Maximum Frequency Response 1 MHz
Maximum Switching Current 50 mA per Channel
Electrical Data  
Supply Voltage 4.75 – 30 VDC
Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption ≤ 1.0 W
Start-Up Time < 1 s
Min. Load Resistance 120 Ω
Reverse Polarity Protection Yes
Short Circuit Protection Yes
EMC: Emitted Interference DIN EN 61000-6-4
EMC: Noise Immunity DIN EN 61000-6-2
MTTF 280 years @ 40 °C
Sensor  
Technology Magnetic
Accuracy (INL) ±0.0878° (≤ 12 bit)
Duty Cycle 180° ± 27° (Speed > 100RPM)
Phase Angle 90° ± 14° (Speed > 100RPM)
Environmental Specifications  
Protection Class (Shaft) IP65
Protection Class (Housing) IP65
Operating Temperature -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Humidity 98% RH, no condensation

Lebih maklumat tentang ETECH INSTRUMENTS HUB
ETECH INSTRUMENTS HUB
ETECH INSTRUMENTS HUB Measuring Instruments Supplier Malaysia, Industrial Sensors Supply Perak, Signal Converters Supplies ~ ETECH INSTRUMENTS HUB