CJ2M-MD211: Pilihan Utama di Johor, Johor Bahru, JB, Malaysia IMS Mechatronics Sdn Bhd

Penerangan

• Five variations in program capacity from 5K steps to 60K steps; scale the CPU to your application needs.

• Faster processors; LD instruction execution time is reduced to 40 ns, floating point trigonometrics in less than 1 μs.

• Optional Pulse I/O Modules can be mounted to enable positioning functions for up to four axes. The module provides high-speed counters, interrupt inputs and pulse train/PWM outputs. (CJ2M CPU Units with Unit Version 2.0 or Later)

• Faster Function Block calls and execution, faster interrupt handling, less overhead time.

• Added execution memory for Function Blocks allows structured, object-oriented programming even in entry-level CPUs.

• General-purpose Ethernet port supports EtherNet/IP tag-based data links, connection to Support Software, communications between PLCs, FTP data transfers, and more (CJ2M-CPU3[]).

• Standard USB port on all models allows Support Software to connect directly through standard USB cable.

• A Serial Option Module can be mounted to add RS-232C or RS-422A/485 communications ports (CJ2M-CPU3[]).

• Compatible with all existing CJ1 power supply-, I/O-, control- and communication units.

Model of Pulse I/O

Modules CJ2M-MD211 (Sinking-type)

CJ2M-MD212 (Sourcing-type )

External Interface 40-pin MIL connector

Pulse Inputs Can be used as normal inputs, interrupt inputs, quick-response inputs, or high-speed

counter inputs.

(Function of each input must be selected in the PLC Setup.)

Input method: Line-driver input or 24-VDC input (selected by wiring)

Normal Inputs 20 max. (10 per Pulse I/O Module)

Input constants: Set in the PLC Setup (0, 0.5, 1, 2, 4, 8, 16, or 32 ms). Default: 8 ms

Interrupt Inputs and

Quick-response

Inputs 8 max. (4 per Pulse I/O Module)

Input signal minimum ON pulse width: 30 μs

High-speed Counter

Inputs 4 max. (2 per Pulse I/O Module)

Input method: Differential-phase (×4) pulses, pulse + direction, up/down pulses, or

increment pulse

Maximum response frequency: 50 kHz for differential phases or 100 kHz for single

phase

Counting mode: Linear mode or circular (ring) mode

Count value: 32 bits

Counter reset: Phase Z + software reset or software reset

Control method: Target-value comparison or range comparison

Gate function: Supported

Pulse Outputs Can be used as normal outputs, pulse outputs, or PWM outputs. (Function of each

output must be selected in the PLC Setup.)

Output method: Sinking or sourcing transistor outputs (The method is determined by

Pulse I/O Module model.)

Normal Outputs 12 max. (6 per Pulse I/O Module)

Pulse Outputs 4 max. (2 per Pulse I/O Module)

Output method: CW/CCW or pulse + direction (The method is determined by the I/O

wiring and the instructions used in the ladder program.)

Output frequency: 1 pps to 100 kpps (in increments of 1 pps)

Output Mode: Continuous mode (for speed control) or independent mode (for position

control)

Output pulses: Relative coordinates: 0000 0000 to 7FFF FFFF hex (0 to 2,147,483,647

pulses)

Absolute coordinates: 8000 0000 to 7FFF FFFF hex (-2,147,483,648 to 2,147,483,647)

Acceleration/deceleration curves: Linear or S-curve

Origin search function: Supported

PWM Outputs 4 max. (2 per Pulse I/O Module)

Output frequency: 0.1 to 6,553.5 Hz (in 0.1-Hz increments) or 1 to 32,800 Hz (in 1-Hz

increments)

Duty ratio: 0.0% to 100.0% (in 0.1% increments)

iMS Motion Solution (Johor) Sdn Bhd (Company Registration 1098771-W)

No.7, Jalan Sasa 4,Taman Gaya, 81800 Ulu Tiram, Johor Bahru, Johor. Malaysia.

TEL:+607-8635240 FAX: +607-8637240

MOBILE: +6019-6774477

EMAIL: [email protected] | WhatsApp | www.ims.com.my

HOTLINE : 1700-818-330

whatsapp us now !

Brand Name

| MOTION DEVICES SPECIALIST | SYSTEM and CONTROL INTEGRATION |

Return / Refund Policy :
All goods sold are not returnable & we accept goods ex-change with equal or lower value of good purchased. If the ex-change items are higher than purchased items, buyer shall top up the differential cost. All payment made are not refundable, please confirm the purchase items code & cost with our sales representative before place orders.

Shipping and Fulfillment :
Thank you for your purchase. Once we have confirmed your payment, we will prepare and ship out your order out within 24-48 hours.( For ex-stock items only, Indent items subject to delivery stated in quotation & conversation in emails). Once your order has been shipped out, you will receive an email notification with the tracking number and tracking details inside.

Private Policy
General Statement of Principles
As described in detail below, any information we gather at this web site is strictly for our use and is not shared with any other entity, public or private, for any reason - period. We will not sell or give away any lists or other data that we may retain and we do not purchase such information from other sources.
Statistical Data
Our servers (as most) track IP addresses and referring pages to help with site maintenance and improvements. This data is viewed only as anonymous statistics to show the busiest times of the day or week, pages with errors and how effective our advertising has been. This information is not used for any other purpose.
Personal Information Collected - Order Forms
With the exception of credit card info, we store the information from your order form to allow us to track consulting issues or refer to a previous order to help provide some customer service. You may elect to have your information completely removed from this system by e-mailing us at [email protected] with your request. We do not store any type of sales information.
Information Correction or Removal
If you wish to correct, update or remove any information about you that may be in our records, please send us e-mail at [email protected] with the details of your request. If you wish to contact us further, please find complete contact information on our contact page.
Cookies
Cookies are files with small amount of data, which may include an anonymous unique identifier. Cookies are sent to your browser from a web site and stored on your computer's hard drive. We use 'cookies' to store your cart contents for you. You can instruct your browser to refuse all cookies or to indicate when a cookie is being sent. However, if you do not accept cookies, you may not be able to use the checkout section of our site.

Changes To This Privacy Policy
This Privacy Policy is effective as of 1^st Jan 2019 and will remain in effect except with respect to any changes in its provisions in the future, which will be in effect immediately after being posted on this page.

Lebih maklumat tentang IMS Mechatronics Sdn Bhd