| Units Of Measure |
TORQUE: ft-lb, in-lb, in-oz, N•m, dN•m, kg•cm and kg•cm; FORCE: lbf, ozf, N, dN, kp and gf |
| Type |
TTC2000 Manual Loader System |
| Printer/Computer Serial Output Port |
RS232 (True), 300-19.2K Baud |
| Power Supply |
UL Approved, 120 VAC/220 VAC, 50/60 Hz |
| Country Of Origin |
USA |
| Histogram |
Lower Set Limit, Upper Set Limit, 10 Divisions |
| Motorized Loader Power Supply |
— |
| Motorized Loader Modes |
— |
| Loader Control Relays |
Two, Normally Open, Form A, Rated 12 DVC @ 1/2 A close contact at 110% CW or CCW or torque/force transducer range |
| Data Storage/Recall |
3,000 Measurements |
| Modes |
Track, Peak Hold, First Peak, Power Tool |
| Storage Temperature Range |
-20–50 °C (-2–122 °F) |
| Loader Hand Crank |
Input torque 8 ft-lb Maximum, Output Torque 2,000 ft-lb Maximum |
| Computer Serial Com Port |
RS232 (True), 300–19.2K Baud (Optional) |
| Torque/Force Display |
Eight digit, alpha-numeric, super bright red LED, 0.55 inch character height |
| Maximum Range Display |
2-line x 16 character 5 x 8 dot-matrix LCD used for MAX. Transducer range, Units, Calibration, Date/Time, Statistics, Torque/Force or Torque Limits Set, Data Store/Recall, Printer Set Up |
| Statistical Analysis |
Max, Min, Range, Mean, SigmaN, Sigma, Cp, Cpk, % Error, -NoGo, +NoGo |
| Accuracy* |
±0.25% of reading at 25 °C (with TTC Transducer calibration) |
| Operating Temperature Range |
10–32 °C (50–90 °F) |
| Capacity, digits [counts] (bit A/D) |
8 [±32,000] (16) |
| Analog Output |
+(CW/-(CW) 1.8 V at Transducer Full Range Linearity, ±1% of reading |
| Temperature Drift Percentage |
+0.03 °C (+0.017 °F) |
| Humidity |
Up to 90% Non-Condensing |
Malaysia
