SNAP-ON OBD-II Breakout Box, 12 V (Blue-Point) / Model: EECTBOB: Pilihan Utama di Malaysia, Melaka, Selangor, Kuala Lumpur (KL), Johor Bahru (JB), Sarawak ALLIANCE SUPPLIES SDN BHD

Penerangan

Pin Output Sockets	16 outputs x 1.0 mm diameter with LED lamp indications
Operating Temperature	32–122 °F (0–50 °C)
Volt Displays	3 Digit LED? 0.1 V Resolution
Country Of Origin	CHN
Permitted Humidity	< 70%
Protocols Detected	PWM (J1850), VPW (J1850), ISO 9141-2, DIS/ISO 14230-4, Canbus (J-2284)
OBD Cable Length, inches (mm)	30 (762)
Protection	Overload - PTC fuse (Self-healing), Reverse Polarity protection
Operating Voltage	Input: 7.0–30.0 V DC
Maximum Load	3.0 Amps Output

Features

Test the vehicle diagnostic link connector DLC for abnormalities such as shorting or reverse polarity at the pins
Provides quick access to all 16 pin terminals during vehicle diagnosis and repair, eliminates guessing which terminals are being probed
Displays live Voltage readings when testing pins
Convenient DLC light illuminates the DLC connector to aid in locating the vehicle’s OBD-II port
Once plugged into the vehicle’s OBD-II port, the unit will check the pins for present voltage—respective LEDs will illuminate with specific colors, pulse or be solid, to identify communication or error (See user manual for details)
Default pin display is set to pin 16 with corresponding actual battery voltage detected from the DLC
No need to crawl under the dash, attempting to probe what you can’t see
Compatible with 12 V systems
Use independently or diagnose further with a customer owned multi-meter and the positive and negative pin adaptors included
Works in-line with the vehicle’s DLC and scan tool (sold separately)
Monitors vehicle voltage during module programming with a low voltage alarm
Eliminates damage to vehicle terminals from probing