Penerangan
Step 1:
Before you attempt to jump start the car, make sure both batteries are of similar voltage or you risk damaging electrical components.
Step 2:
Get the cars as close together as possible but do not allow the cars to touch one another.
Step 3:
With both cars off and in ''park,'' connect the jumper cables in the following order:
- Connect one red clamp to the positive (+) battery post of the ''dead'' battery.
- Connect the other red clamp to the positive (+) post of the good battery.
- Connect one black-end clamp to the negative (-) post of the good battery.
- Carefully connect the other black-end clamp to some large metallic part of your car's engine block. Never connect it to the negative (-) post of the ''dead'' battery. This causes sparking, which could ignite battery gases.
Step 4:
Start the working car and run it at idling speed for a few minutes. After letting it run, start the ''dead'' car. Once your ''dead'' car has started and is running, immediately disconnect the jumper cables in the reverse order.
Lebih maklumat tentang FORWARD BUSINESS (M) SDN BHD
Malaysia
